EVOPEDIA

← all systems · see it in The System

Machine

A machine is a thermodynamic system that uses power to apply forces and control movement to perform an action: a power source and actuators, mechanisms that shape the actuator input into output forces and movement, a controller with sensors, and an operator interface; driven by muscle, water, wind, heat or electricity.

Properties published scienceour proposal

Sourced fields, and our own readings.

born atcontested (C-2706, C-2711): water wheels in the 4th century BC (Egypt) or around 300 BC; watermills as power from as early as the 1st century BC
born precisioncenturies
boundaryInside: the power source and actuators, the machine elements (frame, bearings, shafts, springs, seals, fasteners), the mechanisms, the controller and its sensors, the operator interface, and any stored program (cams, pinned barrels, a PLC's memory). Outside: the energy supply (river, wind, fuel, grid), the load or workpiece, the operator and maintainers, the surroundings (water, air, dust), and the economy the work goes into. On the line: the intake where power enters (valve, flume outlet, terminals), the tool or end effector where the output meets the load, and the controls where a person's hand meets the machine.
nested levelBuilt from machine elements joined at kinematic pairs into mechanisms (simple machines as the elementary cases), driven by an actuator and steered by a controller; one machine is a unit in a mill complex, factory or vehicle, and the machines of an economy are its capital. Programs and the factories' work run on machines (booked from their side).
scaletechnological

Measures (26) published science

electric motors: share of the world's electricityabout 50 %
characteristic clock: rotation of an overshot water wheel (Barbegal reconstruction)critical rim velocity 29.9 rpm for D = 2.0 m; working at 0.2-0.4 of it (Tc)
water wheel noise: pulse frequency2 to about 10 Hz
mechanical efficiency (power out / power in)between 0 and 1; below 1 for every real machine; 1 only for a frictionless ideal machine ratio
share of world energy consumption originating in tribological contactsabout 23% (119 EJ) % of world energy
share of world energy used to remanufacture worn parts3% (16 EJ); 20% (103 EJ) to overcome friction % of world energy
possible cut in friction and wear losses40% in the long term (15 years); 18% in the short term (8 years)
Watt governors in use in England, 1868about 75 000 engines
Barbegal mill complex: flour capacity25 t per day, enough for at least 27,000 people; 16 wheels t/day
Barbegal: water available per mill trainless than 0.13 m3/s per train of eight wheels
Barbegal mill train: rise in downstream basin level when one wheel shuts4-10 %
Barbegal flume to wheel: spillage assumed in the hydraulic model10 (assumed in the model) %
Barbegal flume: mass added by a 5 cm carbonate crust170 kg (on a 15-20 kg flume)
Barbegal flume: internal width narrowed by carbonate0.30 to 0.26 after seven years m
overshot water wheel: maximum hydraulic efficiency / plant efficiency85% hydraulic, 70% plant (breastshot and undershot: 80% and 65%)
flat-board undershot wheel: share of the flow's energy used (Smeaton)about 20 %
duty of seven actual steam engines (Thomson, as reported by Saslow)8.6 to 57.5 %
Smeaton's improvement of the Newcomen engine's efficiencya factor of two, no fundamental design change ratio
internal combustion engines: average efficiencyabout 18-20 (the most efficient reciprocating engine over 50% thermal efficiency)
permanent-magnet drive motors: peak efficiency95-97 (rotary electromotors generally over 90) %
largest electric motors: outputover 100 MW
efficiency at maximum power (low-dissipation Carnot engines)between eta_C/2 and eta_C/(2 - eta_C); Curzon-Ahlborn 1 - sqrt(Tc/Th) for symmetric dissipation ratio
Antikythera mechanism: surviving gearwheels30 gearwheels in 82 fragments (a third of the original) count
Reuleaux's collection of elementary machinesover 800 elementary machines
bacterial flagellar motor: number of different proteinsabout 25 proteins
sickness absence after robotisation (blue-collar routine workers)about 5 more days days of sickness absence

Open contentions (5) open contention

Where sources or readings disagree. Both stay on the map.

Partners and parts published science

Built from / builds (8)

Sits inside / holds (8)

Trades with (valence) (25)

expressed by (14)

floor filled by (22)

Kinds (15)

wired (2)

Notes published science

Layers

The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.

a machine as mechanical engineers describe it: power in, mechanisms, controlled motion out (reader's view)

  1. L1: The world the machine touches: its power source (muscle, falling water, wind, steam, fuel, electric current), the load or workpiece, the operator's hands, and the surroundings (water, heat, dust, deposits)
  2. L2: Power source and actuators: water wheel, windmill sails, piston and cylinder of a steam or internal combustion engine, electric motor windings, hydraulic and pneumatic cylinders, turning the incoming power into forces and movement
  3. L3: Machine elements and joints: frame, bearings, shafts, splines, springs, seals and fasteners; hinged, sliding, helical, cam and gear joints where friction and wear arise
  4. L4: Mechanisms: gear trains, belt and chain drives, cams and followers, linkages (four-bar, Watt's parallel motion), escapements, brakes and clutches, shaping actuator input into the output forces and movement wanted (mechanical advantage, speed ratio)
  5. L5: The controller: sensors, logic and actuators comparing output with a performance goal and directing the actuator input (fly-ball governor, thermostat, cruise control, programmable logic controller, servomotors)
  6. L6: The goal and the program: the set speed, temperature or position, the sequence laid down in a pinned barrel, cam or PLC program, entered and shown through the operator interface (levers, switches, displays)
  7. L7: The action performed: output forces and movement applied to a task (grinding grain, lifting, cutting metal, propelling a vehicle, pumping, generating power), for purposes people set

the boardroom (shared floors)

  1. L4: Mechanisms on a frame (gear trains, linkages, cams, escapements, clutches): where power, load, program, upkeep and surroundings meet and the actuator input is shaped into output forces and movement
  2. L5: The controller: sensors, logic and actuators comparing the output with a performance goal and directing the actuator input
  3. L6: The performance goal and program: set point, sequence, operator's settings, shown back on indicators and displays
  4. L7: The action performed: output forces and movement applied to the task

way in: Feedback (the machine's own output read back: speed by fly-balls, vibration by accelerometers, temperature by thermostats)

  1. L1: The output's state: shaft speed, temperature, vibration
  2. L2: The sensor: fly-balls swinging out with speed; an accelerometer on the housing
  3. L3: The sleeve, levers or signal line carrying the reading to the valve or controller

way in: Load (the work pushing back: grain under the stones, a weight, the workpiece under the cutter)

  1. L1: The load the output moves
  2. L2: The tool or end effector where output meets load (millstone, cutting tool, hook, wheel)
  3. L3: Reaction forces carried back through the frame to the bearings

way in: Operator commands (hands and feet on levers, pedals, switches, buttons)

  1. L1: A person's hand or foot pushing, pulling, switching
  2. L2: The interface control: lever, switch, pedal, button
  3. L3: The command carried by rod, cable or wire
  4. L4: The throttle, valve, clutch or brake the command sets

way in: Power in (muscle, falling water, wind, steam, fuel, electric current)

  1. L1: The source: water in a headrace or flume, wind, steam from a boiler, fuel and air, current from the grid, a person's or animal's effort
  2. L2: The prime mover: wheel buckets, sails, piston and cylinder, motor windings in a magnetic field
  3. L3: The drive: shaft, crank, coupler and beam carrying torque or stroke onward

way in: Stored program (pinned barrels, cams, a PLC's program)

  1. L1: The stored pattern: pins on a rotating barrel, a cam's profile, a program in memory
  2. L2: The reader: a follower riding the cam or pins
  3. L3: The selected motion passed on: which drum strikes, which rhythm plays

way in: Surroundings (water chemistry, weather, deposits on the frame)

  1. L1: Mineral-laden water and the seasons
  2. L2: Exposed woodwork and flumes where deposits grow: no prepared receiver
  3. L3: A narrowed channel delivering water differently to the wheel

way in: Upkeep (lubricant, cleaning, new parts and repairs brought by people)

  1. L1: Repairs, new parts, lubricant and cleaning
  2. L2: The bearings, seals and contacts that take them
  3. L3: Clearances and friction restored at the joints

way out: Electric power out (generators)

  1. L1: Current to the grid or a battery
  2. L4: A generator turned by the mechanism (or a motor run in reverse)

way out: Exhaust from engines

  1. L1: Exhaust gases out through the tailpipe
  2. L2: Combustion in the cylinder or chamber

way out: Heat from friction

  1. L1: Heat into the surroundings
  2. L3: Friction at the joints
  3. L4: Bearings and moving contacts in the mechanisms

way out: Indications to the operator (indicators, gauges, displays)

  1. L1: Light from indicators and displays to the operator's eyes
  2. L6: The state and setting to be shown

way out: Noise and vibration

  1. L1: Sound in the air (water wheels: pulsed 2-10 Hz)
  2. L4: Vibration of the working mechanism

way out: Output forces and movement on the load

  1. L1: The load moved, ground, lifted or cut
  2. L2: The tool or end effector meets the work
  3. L4: The mechanism sets output speed and force
  4. L7: The action chosen for the task

way out: Wear, worn parts and the machine's end

  1. L1: Worn parts replaced; machines decommissioned, materials recovered
  2. L3: Wear at the contacts, leading to breakdowns

Who fills each layer

Sources (34) published science

Machine (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01)
Mechanism (engineering) (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Simple machine (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Wikipedia: Wind power (behind its links)
Surmelihindi G, Leveau P, Spotl C, Bernard V, Passchier CW (2018) The second century CE Roman watermills of Barbegal: unraveling the enigma of one of the oldest industrial complexes. Science Advances 4:eaar3620. doi:10.1126/sciadv.aar3620 (PMC6124920, CC BY-NC) (behind its links)
Steel (encyclopedia, Wikimedia Enterprise snapshot; cache enwiki-Steel.md) (behind its links)
Bearing (mechanical) (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Engine (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Electric motor (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Passchier CW, Bourgeois M, Viollet P-L, Surmelihindi G et al. (2020) Reconstructing the hydraulics of the world's first industrial complex, the second century CE Barbegal watermills, France. Scientific Reports 10. doi:10.1038/s41598-020-74900-5 (PMC7578838, CC BY) (behind its links)
Quaranta E, Muller G, Reniers G (2021) Noise generation and acoustic impact of free surface hydropower machines: focus on water wheels and emerging challenges. International Journal of Environmental Research and Public Health 18:13051. doi:10.3390/ijerph182413051 (PMC8702071, CC BY) (behind its links)
Mechanical efficiency (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Holmberg K, Erdemir A (2017) Influence of tribology on global energy consumption, costs and emissions. Friction 5:263-284. doi:10.1007/s40544-017-0183-5 (open access; abstract read from the publisher page) (behind its links)
Kuznetsov NV, Lobachev MY, Yuldashev MV, Yuldashev RV, Kudryashova EV, Kuznetsova OA, Rosenwasser EN, Abramovich SM (2021) The birth of the global stability theory and the theory of hidden oscillations. arXiv:2107.13889 (European Control Conference 2020 survey) (behind its links)
Water wheel (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Saslow WM (2020) A history of thermodynamics: the missing manual. Entropy 22(1):77. doi:10.3390/e22010077 (PMC7516509, CC BY) (behind its links)
Internal combustion engine (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Zerovnik A, Dall'Olio S, Krasna S, Ahcin Z et al. (2026) Efficient elastocaloric drive system enabled by constant-torque and work-recovery design. Nature Communications 17. doi:10.1038/s41467-026-73314-7 (PMC13385374, CC BY-NC-ND) (behind its links)
Esposito M, Kawai R, Lindenberg K, Van den Broeck C (2010) Efficiency at maximum power of low dissipation Carnot engines. arXiv:1008.2464 (Physical Review Letters 105:150603) (behind its links)
Freeth T, Higgon D, Dacanalis A, MacDonald L, Georgakopoulou M, Wojcik A (2021) A model of the Cosmos in the ancient Greek Antikythera Mechanism. Scientific Reports 11:5821, doi:10.1038/s41598-021-84310-w (behind its links)
Guo S, Liu J (2022) The bacterial flagellar motor: insights into torque generation, rotational switching, and mechanosensing. Frontiers in Microbiology 13:911114. doi:10.3389/fmicb.2022.911114 (PMC9195833, CC BY) (behind its links)
Umblijs J, Ostbakken KM (2025) Sick of robots: heterogeneous effects of industrial robots on sickness absence. Health Economics 34. doi:10.1002/hec.70010 (PMC12412072, CC BY) (behind its links)
Centrifugal governor (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Hassan IU, Panduru K, Walsh J (2024) An in-depth study of vibration sensors for condition monitoring. Sensors 24(3):740. doi:10.3390/s24030740 (PMC10857366, CC BY) (behind its links)
Machine tool (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Watermill (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Building science (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Sutherland IE (1963/2003) Sketchpad: A man-machine graphical communication system. MIT PhD thesis; Cambridge Computer Laboratory UCAM-CL-TR-574 edition (behind its links)
Wynn DC, Clarkson PJ (2018) Process models in design and development. Research in Engineering Design 29:161-202. doi:10.1007/s00163-017-0262-7 (open access, CC BY 4.0) (behind its links)
Gear (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Perpetual motion (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Steam engine (Wikipedia, rev 1381867189, 2026-10-25, via Wikimedia Enterprise cache) (behind its links)
Erbas-Cakmak S, Leigh DA, McTernan CT, Nussbaumer AL (2015) Artificial molecular machines. Chemical Reviews 115:10081-10206. doi:10.1021/acs.chemrev.5b00146 (PMC4585175, CC BY) (behind its links)
Burrows M, Sutton G (2013) Interacting gears synchronize propulsive leg movements in a jumping insect. Science 341:1254-1256. doi:10.1126/science.1240284 (abstract via Europe PMC, PMID 24031019) (behind its links)