EVOPEDIA

← all systems · see it in The System

Engineering design process

The engineering design process refers to how engineers create and validate designs for products, processes and systems---including their lifecycle processes such as manufacture, maintenance and end-of-life considerations such as recycling, remanufacture or disposal.

Properties published scienceour proposal

Sourced fields, and our own readings.

born atas a described and modelled process, the 1950s (Evans 1959; Asimow 1962); phased investment decisions since the 1940s; the practice older and contested
born precisiondecade
boundaryInside: the activities by which engineers go from a need to a validated design and a plan to produce it (research, establishing requirements, feasibility, concept generation and evaluation, preliminary and detailed design, prototyping and testing, production planning), the iteration among them, the reviews and gates that pass a design on, the representations it works through (sketches, drawings, CAD models, specifications, prototypes) and the people and teams doing it. Outside: engineering as a whole (which holds it), the science it draws on, the stakeholders whose needs start it, manufacturing that carries out the production plan, and the product once released.
nested levelA part of engineering (rung 11), carried by engineers and design teams in firms and agencies; its output (a validated design and production plan) is the input of manufacture and of the product's life cycle.
scalesocial

Measures (9) published science

Life-cycle cost committed by designabout 75 % of life-cycle cost
Life-cycle cost expended during designabout 15 % of life-cycle cost
Window in which early prototyping is criticalfirst 30 % of project time
Cost of isolated subsystem testing relative to integrated prototypingabout 60 % of the integrated prototyping cost
Lead-time reduction expected from product development value stream mapping50-75 % of development lead time
Cognitive processes found in protocol studies of conceptual design24 (10 search, 14 exploration) processes in 33 studies
Design processes in situated Function-Behaviour-Structure20 transformation processes (8 in the original FBS)
Age of the design spiral's general form in usemore than five decades (Evans 1959) years
First appearance of Acheulean handaxesafter ~1.8 million years ago

Open contentions (4) open contention

Where sources or readings disagree. Both stay on the map.

Partners and parts published science

Built from / builds (11)

Sits inside / holds (2)

Trades with (valence) (11)

expressed by (27)

floor filled by (17)

Kinds (17)

wired (2)

Notes published science

Layers

The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.

the boardroom (shared floors)

  1. L4: Problem definition: requirements established, interpreted and renegotiated; feasibility
  2. L5: Synthesis and analysis: concepts generated, configured and detailed; modelled and tested
  3. L6: Evaluation and decision: concepts compared and selected; reviews and go/kill gates; cost, risk and performance traded
  4. L7: Commitment: requirements and design validated and baselined; production planned; released

the engineering design process as design researchers describe it: from a need, through requirements, concepts, analysis, prototypes and tests, to a validated design released for production (reader's view)

  1. L1: The world the design must work in and on: users and their use, operating conditions and loads, materials, manufacture, maintenance and end of life
  2. L2: Taking it in: research (literature, existing solutions, reverse engineering, market needs) and tests of prototypes
  3. L3: Representations: sketches, schematics, CAD models, drawings and specifications
  4. L4: Problem definition: design requirements and requirement analysis, with feasibility
  5. L5: Synthesis and analysis: concept generation, preliminary and detailed design, modelling and simulation
  6. L6: Evaluation and decision: concept evaluation, design reviews and gates (go/kill), trade-offs of cost, risk and performance
  7. L7: Commitment and realisation: a validated design and production plan released to be made

way in: Constraints: cost limits, standards and required properties (maintainability, availability, testability)

  1. L1: Budgets, markets and codes the project must live within
  2. L2: Feasibility study: alternatives and costs assessed
  3. L3: Feasibility report and requirement parameters
  4. L4: Achievable and within cost constraints: go or no-go into design

way in: Emotion: arousal, stress, frustration and satisfaction while designing

  1. L1: The body under design work: heart rhythm and stress
  2. L2: Skin conductance: arousal, processing and attention
  3. L4: Emotions read from body and brain signals: frustration, satisfaction, engagement, challenge

way in: Need: what users, clients and markets need

  1. L1: Users, clients and markets with needs
  2. L2: Needs gathered: marketplace needs and stakeholder expectations collected
  3. L3: Needs written as functions, attributes and specifications
  4. L4: The problem posed as requirements, interpreted and renegotiated

way in: Prior art: literature, existing solutions, catalogs, experts, examples

  1. L1: Literature, products on the market, catalogs, experts
  2. L2: Located and read; products reverse engineered
  3. L3: Example solutions held in view
  4. L4: Schemas and working principles brought to the problem

way in: Science: engineering sciences, basic sciences and mathematics

  1. L1: Established science and mathematics
  2. L2: Science taken up as heuristics
  3. L4: Applied to decisions about the design

way in: Service: how earlier products behaved in use (inter-project and generational learning)

  1. L1: Products in use, maintenance and end of life
  2. L2: Problems and successes of existing solutions noted
  3. L4: Learning fed back into the next generation

way in: Sight: sketches, drawings, CAD screens, examples and prototypes seen

  1. L1: Light from sketches, screens, example solutions and prototypes
  2. L2: Eyes; eye movements tracked during design tasks
  3. L4: Visuospatial processing; secondary visual cortex engaged in fixation on examples

way in: Simulation: CAD models, finite element analysis, virtual prototypes

  1. L1: The design held as a computer model
  2. L2: Stress and displacement computed by the finite element method
  3. L3: Results displayed and optimised
  4. L4: Results held against requirements

way in: Sketch: the designer's own sketches and drawings read back

  1. L1: Marks the designer has made: sketches, drawings
  2. L2: Seen again: visual features noticed, some unintended
  3. L3: Held as external memory, off-loading working memory
  4. L4: Read as cues that change how the problem is understood

way in: Talk: team discussion, brainstorming and design reviews heard

  1. L1: Spoken ideas in a group, one speaker at a time
  2. L4: Ideas heard and built upon; feedback received

way in: Testing: prototypes built and tested

  1. L1: A prototype in the world: a pre-production representation of some aspect of the design
  2. L2: Tested: whole or in isolated subsystems, scaled or full, physical or virtual
  3. L3: Test results recorded
  4. L4: Results validate requirements and reveal design concerns

way in: Thought: schemas retrieved, ideas generated, insights

  1. L1: Knowledge held in long-term memory
  2. L2: Operators activated in working memory
  3. L3: Search and exploration: cognitive processes on mental representations
  4. L4: Ideation in the prefrontal cortex; sudden insight

way in: Touch: prototypes handled

  1. L1: Physical prototypes and materials in the hands
  2. L4: Tacit knowledge of complex phenomena

way out: Communicating: design reviews, briefings and team talk

  1. L1: Speech and documents among the team and stakeholders
  2. L5: Design communication, the last step of simplified stage models
  3. L6: A design to put before a review or gate

way out: Prototyping: concepts built to be tested

  1. L1: The prototype in the world
  2. L2: Fabrication, fast or slow
  3. L5: Prototype strategy: scale, system level, requirements fidelity, media
  4. L6: Decision on what to prototype and how many (iterative or parallel)

way out: Releasing: the validated design and production plan handed to manufacture

  1. L1: The product made
  2. L2: Qualification tests on the mass-produced version
  3. L5: Production planning: materials, processes, sequence of operations, tools
  4. L7: Baseline and release

way out: Representing: sketches, drawings, CAD models and specifications made

  1. L1: Marks on paper or screen
  2. L2: The hand sketching or drawing (movement outlet)
  3. L3: Schematics, diagrams, layouts; solid models, drawings, specifications
  4. L5: A design or concept to set down

Sources (15) published science

Engineering design process (Wikipedia, via Wikimedia Enterprise)
NASA Systems Engineering Handbook, NASA/SP-2016-6105 Rev2 (US government work; chapters 1-5 and glossary read, appendices not) (behind its links)
Camburn B, Viswanathan V, Linsey J, Anderson D, Jensen D, Crawford R, Otto K, Wood K (2017) Design prototyping methods: state of the art in strategies, techniques, and guidelines. Design Science 3:e13. doi:10.1017/dsj.2017.10 (CC BY 4.0) (behind its links)
Wynn DC, Clarkson PJ (2018) Process models in design and development. Research in Engineering Design 29:161-202. doi:10.1007/s00163-017-0262-7 (open access, CC BY 4.0) (behind its links)
Hay L, Duffy AHB, McTeague C, Pidgeon LM, Vuletic T, Grealy M (2017) A systematic review of protocol studies on conceptual design cognition: design as search and exploration. Design Science 3:e10. doi:10.1017/dsj.2017.11 (CC BY) (behind its links)
Clark J, Shipton C, Moncel MH, Nigst PR, et al. When is a handaxe a planned-axe? Exploring morphological variability in the Acheulean. PLOS ONE 19(7):e0307081, 2024. doi:10.1371/journal.pone.0307081 (CC BY) (behind its links)
Phase-gate process (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Wynn DC, Eckert CM. Perspectives on iteration in design and development. Research in Engineering Design 28:153-184, 2017. doi:10.1007/s00163-016-0226-3 (abstract read; full text behind a paywall) (behind its links)
Gero JS, Milovanovic J (2020) A framework for studying design thinking through measuring designers' minds, bodies and brains. Design Science 6:e19. doi:10.1017/dsj.2020.15 (CC BY) (behind its links)
Hammack WS, Anderson JL. Working in the Penumbra of Understanding. Issues in Science and Technology, 16 February 2022 (National Academies / Arizona State University) (behind its links)
van Lent P, et al. (2026) Comparing metabolic engineering scenarios using simulated design-build-test-learn-cycles. Front Bioeng Biotechnol. doi:10.3389/fbioe.2026.1802948 (PMC13351528, CC BY) (behind its links)
Brainstorming (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Fu KK, Sylcott B, Das K (2019) Using fMRI to deepen our understanding of design fixation. Design Science 5:e22. doi:10.1017/dsj.2019.21 (CC BY) (behind its links)
Prototype (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Feynman RP. Personal observations on the reliability of the Shuttle. Report of the Presidential Commission on the Space Shuttle Challenger Accident, Vol. 2, Appendix F, 1986 (US government work) (behind its links)