EVOPEDIA

← all systems · see it in The System

Steel

Steel is an alloy of iron and carbon (0.02-2.14% carbon by weight for plain carbon steel), often with other elements, whose crystal forms (body-centred cubic ferrite, face-centred cubic austenite, tetragonal martensite, orthorhombic cementite) and microstructures are set by composition and thermal and mechanical history, giving improved mechanical properties over pure iron.

Properties published scienceour proposal

Sourced fields, and our own readings.

aliasesSteel (iron-carbon alloys, 0.01-2.00% C)
born atabout 1800 BC, Kaman-Kalehöyük (contested, C-3051)
born precisionapprox
boundaryInside: the iron-carbon alloy itself, its lattice, the carbon and alloying atoms in it, its defects, phases, grains and inclusions, out to its surface (and any passive film it grows). Outside: the ore, fuel, scrap, air and furnace that make it; the heat, loads, water, salts, hydrogen, microbes and fields that act on it in service; the people, structures and machines that shape and use it.
nested levelBuilt from iron and carbon atoms (with Cr, Ni, Mn, Mo, Si and others) in a polycrystal; it is a part of beams, rails, gears, bearings, hulls, rebar and cores, and those are parts of buildings, machines and ships.
scaletechnological

Measures (36) published science

BF-BOF shareabout 70 %
carbon content of plain carbon steel0.02-2.14 wt%
carbon solubility in ferrite (at 723 C)0.021 wt%
carbon solubility in austenite (at 1148 C)2.1 (38 x ferrite) wt%
alpha (BCC) to gamma (FCC) iron912 C
Curie point of alpha iron770 C
density7750-8050 kg/m3
chromium for stainless steel>=10.5 wt%
passive film thickness<10 nm
characteristic clock: martensite transformation frontabout half the speed of sound in steel
Bessemer blow10-20 (initially about 20) min
critical quench for eutectoid steel (750 to 450 C)0.7 s (430 C/s)
BOS heat (150-300 t)30-40 min
product lifespan (weighted average)38 years
EAF heat from cold scrap (80 t)about 50 min
theoretical minimum to melt a tonne of scrap300 kWh/t
EAF electricity per tonneabout 440 kWh/t
EAF melting efficiency (minimum / actual)about 0.68 (300/440, computed here) ratio
world crude steel>1.6 billion t/yr
China's share of production (2023)54 %
continuously cast share96 %
steel sector CO2 (2021)2.8 Gt CO2
share of global CO27 %
CO2 per tonne of steel (2020 average)1.89 t CO2/t
end-of-life scrap recovery50-90 %
Bessemer price fall£40 to £6-7 per long ton
recycled share of raw material (2016)about 40 (630 of 1,628 Mt) %
martensite hardness vs pearlite700 vs 400 Brinell
ancient martensite hardness (Didyma)>870 HV
gear steel fatigue strength at 10^9 cyclesabout 485 MPa
cold-worked dual-phase steel1290 MPa at 3% elongation (hot-rolled 789 MPa yield at about 25%) MPa / %
MIC corrosion rate under carbon starvation0.55 (pitting 0.65) mm/yr
hydrogen toughness loss (5 wppm, X65)14.1 %
silicon in electrical steelup to 3.2 wt%
US direct cost of corrosion (1998)276 billion (3.2% of GDP) USD
Liberty ship brittle fractures in WWIInearly 1,500 count

Open contentions (8) open contention

Where sources or readings disagree. Both stay on the map.

Partners and parts published science

Built from / builds (10)

Sits inside / holds (5)

Trades with (valence) (24)

expressed by (7)

floor filled by (20)

Kinds (14)

wired (3)

Notes published science

Layers

The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.

steel as metallurgists describe it (reader's view: setting and processing, atoms and bonding, crystal structures, microstructure, properties, performance in service)

  1. L1: The setting: ore, scrap, charcoal or coke, alloy additions, oxygen or air, the furnace and the quench; in service the loads, temperatures, air, water, salts, hydrogen, microbes and fields around the part
  2. L2: Atoms and bonding: iron atoms in a metallic lattice; carbon (0.02-2.14%) in interstitial sites; Cr, Ni, Mn, Mo, Si and others substituted; tramp copper that cannot be refined out
  3. L3: Crystal forms and defects: BCC ferrite (carbon under 0.021%), FCC austenite (up to 2.1%), tetragonal martensite, orthorhombic cementite; dislocations, vacancies, grain boundaries and inclusions
  4. L4: Microstructure: pearlite, bainite, martensite and retained austenite, ferrite and carbides, grains and inclusions, set by composition and by the heat treatment and working the steel has been through
  5. L5: Properties: strength, hardness, toughness, ductility, fatigue strength, magnetic loss, corrosion resistance, each bought with another
  6. L6: Performance in service: the beam, rail, blade, gear, bearing, pipe, hull or core carries load, cuts, guides flux, and corrodes, fatigues, embrittles or fractures; at the end of its life it is scrap

the boardroom (shared floors)

  1. L4: The microstructure: where heat, composition and working meet and leave phases and constituents (pearlite, bainite, martensite, retained austenite, carbides, grains, inclusions)
  2. L5: The properties: strength, hardness, toughness, ductility, fatigue strength, magnetic loss, corrosion resistance and background radioactivity, read off the microstructure and traded against each other
  3. L6: Performance in service: the part as used (beam, rail, blade, gear, bearing, hull, core) and how it fails (corrosion, fatigue, hydrogen and stress corrosion cracking, brittle fracture)

way in: Air, water and salts (the corroding surroundings)

  1. L1: Oxygen, water, chloride, pH; low oxygen or chloride hinders a film from re-forming
  2. L2: Surface oxidation: iron rusts; chromium at 10.5% or more grows a passive film under 10 nm
  3. L3: The film holds or breaks: it recovers if damaged; breakdown leaves pits, crevices and stress corrosion cracks
  4. L4: Weak places in the microstructure: sensitized grain boundaries with chromium carbides
  5. L5: Corrosion resistance as a property: stainless against carbon steel; galvanized coatings for a similar effect

way in: Carbon and alloying elements (what goes into the melt)

  1. L1: The charge: pig iron from ore smelted with coke or charcoal, scrap, cast and wrought iron together (co-fusion), alloy additions, and oxygen to burn carbon off
  2. L2: Dissolution: carbon dissolves readily in liquid or solid iron and migrates across a solid-liquid interface; Ni and Mn stabilise austenite, Cr gives passivity; tramp copper stays in
  3. L3: Places in the lattice: interstitial carbon, 0.021% in ferrite against 2.1% in austenite; elements beyond the lattice's capacity leave as carbides

way in: Heat and cooling (the furnace, the quench, service temperature)

  1. L1: Heat from the hearth or furnace; heat drawn off by water, oil or air in the quench
  2. L2: Atoms vibrate and carbon diffuses; the cooling rate sets how far carbon can move; a water quench slows toward the core
  3. L3: The lattice switches: BCC alpha at 912 C and below, FCC gamma above; at Ms the austenite becomes mechanically unstable and flips to martensite at about half the speed of sound

way in: Hydrogen (from water, acid, sour gas, cathodic protection, hydrogen service)

  1. L1: Hydrogen generated at the surface by cathodic protection, acid or sulfide
  2. L2: Uptake and diffusion through the lattice
  3. L3: Trapping at dislocations, vacancies, grain boundaries, precipitates and phase interfaces
  4. L4: Accumulation where stress is high: at crack tips; plastic deformation makes new traps

way in: Magnetic field (windings, magnets, the Earth's field)

  1. L1: The field of a transformer's or motor's windings
  2. L2: Two unpaired electrons per iron atom whose spins align below the Curie point (770 C)
  3. L3: The crystal decides: ferritic (BCC) stainless steels are magnetic, austenitic (FCC) ones are not
  4. L4: The microstructure taxes it: carbides, sulfides, oxides even 1 micrometre across raise hysteresis loss; carbon precipitating over time causes magnetic aging

way in: Mechanical load (forging, rolling, the service load, cyclic load)

  1. L1: Hammer and rolls in making; weight, waves, wind and rotation in service, often cyclic
  2. L2: Bonds stretch elastically: high elastic modulus and yield strength
  3. L3: Dislocations glide and multiply; carbon in the lattice inhibits deformation; strain turns retained austenite to martensite (TRIP)
  4. L4: Stress gathers at inclusions: fish-eye cracks start there in very-high-cycle fatigue

way in: Microbes in biofilms (sulfate reducers, electroactive bacteria)

  1. L1: Biofilms in sediment and seawater on offshore steel; nutrient regime shapes the community
  2. L2: Metabolites (sulfide) and direct electron extraction from metallic iron when carbon is short
  3. L3: Across the film: Geobacter takes electrons through an intact chromium oxide layer
  4. L4: Under-deposit pits in the microstructure beneath biofilm
  5. L5: Corrosion rate as a property: 0.55 mm per year under carbon starvation; stainless steel once thought immune

way in: The air in the furnace (nitrogen, and since 1945 fallout)

  1. L1: Air forced through the converter (Bessemer) or oxygen (BOS) taking in the atmosphere's gases and particles
  2. L2: Nitrogen and airborne radionuclides enter the melt; BOS's pure oxygen limited the nitrogen

way out: Carbon out of the melt as CO2 (refining and ironmaking)

  1. L1: CO2 to the atmosphere: about 1.89 t per tonne of steel (2020), 7% of global CO2
  2. L2: Carbon dissolved in the melt meets oxygen
  3. L4: The target carbon content set for the grade

way out: Corrosion back to the surroundings (dissolved iron, rust, electrons to microbes)

  1. L1: Iron ions and oxides in the water; electrons to microbes' respiration
  2. L2: Anodic dissolution at the surface
  3. L6: The part corrodes in service; pits can hide beneath an intact surface

way out: Edges and wear (cutting tools, chisels, blades, abrasion-resistant skins)

  1. L1: Wood, stone, metal cut; the masonry of 6th-century BCE Didyma
  2. L5: Hardness: martensite up to 700 Brinell against 400 for pearlite
  3. L6: The edge in use

way out: End of life: scrap back into the melt

  1. L1: Scrap collected (50-90% recovered) and charged to an EAF or BOF, carrying copper and other tramp elements
  2. L6: The product retires after about 38 years on average

way out: Load carried (skeletons, rails, hulls, rebar)

  1. L1: The load held up, rolled or moved
  2. L5: Strength and stiffness carry the load
  3. L6: The part in service

way out: Magnetic flux guided (transformer, motor and generator cores)

  1. L1: Flux linking the windings; the lost part leaves as heat
  2. L5: Low core loss from silicon steel

Sources (35) published science

Materials science (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01, revision 1382489811)
Steel (encyclopedia, Wikimedia Enterprise snapshot; cache enwiki-Steel.md)
Shi Z, Li J, Zhang X, Shang C, Cao W. 2022. Influence mechanisms of inclusion types on rotating bending fatigue properties of SAE52100 bearing steel. Materials 15:5037. doi:10.3390/ma15145037 (PMC9323467, CC BY) (behind its links)
Deng H, Li W, Sakai T, Sun Z. 2015. Very high cycle fatigue failure analysis and life prediction of Cr-Ni-W gear steel based on crack initiation and growth behaviors. Materials 8:8338. doi:10.3390/ma8125459 (PMC5458838, CC BY) (behind its links)
Electrical steel (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Güder Ü, Mokrišová J, Verčík M, Yalçın Ü et al. 2025. Earliest evidence for systematic use of ultrahigh carbon steel in the ancient Aegean in the Archaic Milesia. PLOS ONE. doi:10.1371/journal.pone.0312244 (PMC11906082, CC BY) (behind its links)
Martensite (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Stainless steel (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Corrosion (Wikipedia, via Wikimedia Enterprise) (behind its links)
Watari T, McLellan B. 2024. Decarbonizing the global steel industry in a resource-constrained future: a systems perspective. Phil. Trans. R. Soc. A 382. doi:10.1098/rsta.2023.0233 (PMC11542903, CC BY) (behind its links)
Iron (Wikipedia, 2026-10-19) (behind its links)
Bessemer process (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Electric arc furnace (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Wu X, Meng J, Liang X, Sun L, Coffman D et al. 2025. Technological pathways for cost-effective steel decarbonization. Nature 647. doi:10.1038/s41586-025-09658-9 (PMC12589104, CC BY) (behind its links)
Kankanamge Dona NS, Arias A, Donati F et al. 2025. Hydrogen and biomass-based carbon source integration for iron and steel manufacturing: a systematic review of life cycle assessment studies. Open Research Europe. doi:10.12688/openreseurope.20725.2 (PMC12936486, CC BY) (behind its links)
Zhang L, Cai P, Zhang L, Hou Z, Wu G. 2025. Synergistic deformation of ferrite/martensite laminates brings high strength and good ductility in dual-phase steel. Materials 18:4198. doi:10.3390/ma18174198 (PMC12430671, CC BY) (behind its links)
Taghavi Kalajahi S, Lisec J, Ghafoori E et al. 2026. Carbon starvation enhances microbiologically influenced corrosion in marine offshore infrastructures. Frontiers in Microbiology. doi:10.3389/fmicb.2026.1908395 (PMC13572702, CC BY) (behind its links)
Shulin P, Tahri W, Khan R, Alshaaer M. 2026. Mechanisms of hydrogen embrittlement, mitigation strategies, and emerging materials for hydrogen energy and advanced manufacturing. Frontiers in Chemistry. doi:10.3389/fchem.2026.1957974 (PMC13599125, CC BY) (behind its links)
Liberty ship (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Pérez Horno B, Feldmann A, Samuelsson P. 2025. Lost in the shuffle: a taxonomy for the accumulation of unwanted elements in steel recycling. Waste Management & Research. doi:10.1177/0734242X251350541 (PMC12618735, open access) (behind its links)
Esmaeili K, Wang L, Harvey TJ, et al. (2022) Electrical Discharges in Oil-Lubricated Rolling Contacts and Their Detection Using Electrostatic Sensing Technique. Sensors 22:392. doi:10.3390/s22010392 (PMC8749829, CC BY) (behind its links)
Gear (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Jin Y, Cheng Q, Xu D, Lovley DR. 2026. Electroactive microbes short-circuit the passive film to corrode stainless steel. Research. doi:10.34133/research.1185 (PMC12963726, CC BY) (behind its links)
Viola V, Marelli N, Caplanusi T et al. 2026. Orthopedic implant allergies: a review of current knowledge on metal hypersensitivity and prosthesis failure. EFORT Open Reviews. doi:10.1530/eor-2025-0252 (PMC13663588, CC BY) (behind its links)
Suenaga K. 2020. The 'Industrial Enlightenment' and technological paradigms of the modern steel industry. Technology in Society 63:101375. doi:10.1016/j.techsoc.2020.101375 (PMC7477601) (behind its links)
Qiao S, Qian W. 2020. In-situ observation of ancient co-fusion steelmaking process based on HT-CLSM. Scientific Reports 10. doi:10.1038/s41598-020-76326-5 (PMC7669863, CC BY) (behind its links)
Crucible steel (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Tool (Wikipedia, via Wikimedia Enterprise snapshot 2026-11-01) (behind its links)
Pinoski L, Antony Jose S, Menezes PL. 2026. Stress corrosion cracking: mechanisms, materials challenges, and engineering solutions. Materials 19:898. doi:10.3390/ma19050898 (PMC12986410, CC BY) (behind its links)
Low-background steel (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Jurči P. 2020. History, developments and trends in the heat treatment of steel. Materials 13:4003. doi:10.3390/ma13184003 (PMC7560109, CC BY; editorial) (behind its links)
Wikipedia: Alloy (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Gong P, Kwok TWJ, Wang D et al. 2025. A multi-scale microstructure to address the strength-ductility trade off in high strength steel for fusion reactors. Nature Communications. doi:10.1038/s41467-025-58042-8 (PMC11926085) (behind its links)
Bainite (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)
Direct reduced iron (encyclopedia, Wikimedia Enterprise snapshot) (behind its links)