← all systems · see it in The System
Alloy
An alloy is a mixture of a metal with one or more other elements, metallic or not, joined by metallic bonding, either as a single solid solution (substitutional or interstitial) or as a mixture of phases, including intermetallic compounds; its properties (strength, hardness, melting range, corrosion resistance, conductivity) differ from those of the pure elements, and are set by composition and by thermal and mechanical history.
Properties published scienceour proposal
Sourced fields, and our own readings.
| born at | natural alloys: with metallic planetary cores and native electrum (not dated in sources read); made alloys about 5,000 BCE (src:longman-2018) |
| born precision | approx (contested, C-3311) |
| boundary | Inside: the mixed metal itself, its base metal and the elements dissolved or combined in it, its lattice, phases, precipitates, grains and defects, out to its surface and any oxide film it grows. Outside: the ores, fuels, fluxes and furnace that make it; the heat, loads, water, salts, oxygen, body fluids and microbes that act on it; the people who choose its recipe, shape it and use it. |
| nested level | Built from atoms of a base metal and other elements held by metallic bonding in crystals; it is a part of coins, tools, statues, bells, solder joints, implants and turbine blades, and in nature of meteorites and a planet's core. |
| scale | technological |
Measures (33) published science
| maximum carbon held by iron (as cementite) | 6.67 wt% |
| first stainless steel (Krupp 1912) | 21 Cr, 7 Ni wt% |
| superalloy creep-resistant service temperature | up to 85% of incipient melting (as high as 1100) C |
| interstitial solute radius limit | 57-59 % of solvent radius |
| hospital infection reduction with copper surfaces | 58 % |
| nickel in Earth's outer core alloy | about 10 % |
| tin in lead inclusions of recent bronzes | about 3 at% |
| phases allowed by the phase rule for Cantor's 20-component alloy | up to 21 phases |
| Indus Valley metal finds with tin | 67 of 324 (20%) finds |
| rhenium addition and creep life | 3 wt% Re: creep life almost doubled ratio |
| ideal mixing entropy, five-component equiatomic alloy | 1.61 R |
| gamma prime / gamma lattice mismatch | about 0.5 % |
| copper alloy contact killing time | 99.9% in 1 h (pure Cu); 2 h (60% Cu) |
| bell bronze tin | 20 wt% |
| precipitating elements in Al and Ti alloys | about 10 % of composition |
| Vickers hardness of bronze | 60-258 (wrought iron 30-80) HV |
| implant alloy modulus against cortical bone | Ti 112, Ti-6Al-4V 115; bone 7-30 GPa |
| invention of alloying | about 5000 BCE |
| passive film repassivation time | 1-2 ms |
| time for TCP phases to form | thousands of hours above about 750 C |
| people with nickel allergy | 10-15 % of population |
| age hardening of Wilm's Al-Cu-Mg alloy | overnight at room temperature day |
| share of brass recycled | almost 90 % |
| tin in bronze | about 12-12.5 wt% |
| predicted single-phase equimolar quinary HEAs | 30201 (5%) alloys |
| classic and mild bronze tin | about 10 (cast); about 6 (hammered) wt% |
| refractory HEA service temperature | up to 1400 C |
| equimolar quinary candidate alloys (40 elements) | 658008 alloys |
| earliest anthropogenic lead pollution, Balkans | about 3600 BCE |
| turbine disk superalloy strength temperature | up to 700 C |
| lead in Roman bronze statues | 5-20 wt% |
| tin unmixing from lead inclusions in bronze (clock) | hundreds of years yr |
| Hume-Rothery size limit (substitutional) | 15 % difference in atomic radius |
Open contentions (7) open contention
Where sources or readings disagree. Both stay on the map.
- C-3311 Where and when was the first tin bronze made?
booked: The map keeps the competing readings; none is ruled.
the other reading: 'Around 2500 BC, people began alloying tin and copper' (src:wp:alloy); tin the major addition only in the late 3rd millennium BCE (src:wp:bronze); alloying invented about 5,000 BCE (src:longman-2018); whether a bronze smelted from mixed ore counts as deliberate alloying - C-3319 Do high-entropy alloys have special 'core effects'?
booked: The map keeps the competing readings; none is ruled.
the other reading: their 'validity ... has been doubted' (src:onawale-2021); entropy alone is not enough; enthalpy decides (src:wp:high-entropy-alloy, Otto et al.); a high melting point of the elements is among the most important drivers (src:chen-2023-hea) - C-3320 What counts as a high-entropy alloy?
booked: The map keeps the competing readings; none is ruled.
the other reading: only single-phase solid solutions count (Otto et al.); four-component alloys, or mixing entropy between R and 1.5R, count too - C-3322 Do electron counts decide which alloys form?
booked: The map keeps the competing readings; none is ruled.
the other reading: e/a values for transition metals 'quite controversial ... no satisfactory solutions' - C-3324 How big can an atom be and still fit between metal atoms?
booked: The map keeps the competing readings; none is ruled.
the other reading: 59% (src:wp:hume-rothery-rules); 57% (src:wp:solid-solution-strengthening) - C-3340 Why do some metals protect themselves with a passive film?
booked: The map keeps the competing readings; none is ruled.
the other reading: the adsorption theory: chemisorbed films displace water and slow anodic dissolution - C-3346 How does rhenium strengthen superalloys?
booked: The map keeps the competing readings; none is ruled.
the other reading: other mechanisms proposed and debated; the authors call mechanism (iii) 'the most controversial'
Partners and parts published science
Built from / builds (11)
- Engine
- Iron atom
- Nickel atom
- Copper (Cu, Z = 29)
- Metals (astronomy: elements heavier than helium)
- Crystal
- Metallic bond
- Chemical element (the periodic table)
- Dislocations (line defects)
- Solid solution (alloys, steel, Ra in BaSO4)
- Intermetallic compound (a phase)
Sits inside / holds (6)
Trades with (valence) (15)
- Engine via sys:thermal-energy · Alloy gain
- Earth's crust (primordial, oceanic and continental) via sys:matter · Alloy gain
- Bacterium (bacterial cell) via sys:aqueous-solution · Alloy even
- Aqueous solution via sys:aqueous-solution · Alloy loss
- Atmosphere of Earth via sys:atmosphere-of-earth · Alloy mixed
- Iron atom via sys:electromagnetic-field · Alloy gain
- Nickel atom via sys:electromagnetic-field · Alloy gain
- Bone via sys:force · Alloy even
- Human (Homo sapiens) via sys:sensory-environment · Alloy gain
- Copper (Cu, Z = 29) via sys:electromagnetic-field · Alloy gain
- Immune system via sys:interstitial-fluid · Alloy even
- Money via sys:matter · Alloy gain
- Sculpture via sys:matter · Alloy gain
- Skin via sys:aqueous-solution · Alloy loss
- Tool via sys:matter · Alloy even
expressed by (7)
- Recombination/Composition
- Templating / Standardization
- Quality Improvement/Refinement
- Interoperability/Transduction (Bridging)
- Resource Denial/Attrition
- Physical/Virtual Barrier
- Resilience & Repair
floor filled by (26)
- Engine
- Earth's crust (primordial, oceanic and continental)
- Aqueous solution
- Iron atom
- Nickel atom
- Thermal energy (heat, temperature and heat flow)
- Human (Homo sapiens)
- Copper (Cu, Z = 29)
- Zinc (Zn, Z = 30)
- Tin (Sn, Z = 50)
- Metals (astronomy: elements heavier than helium)
- Crystal
- Money
- Sculpture
- Metallic bond
- Dislocations (line defects)
- Grain boundaries
- Solid solution (alloys, steel, Ra in BaSO4)
- Corrosion
- Liquid outer core
- Tool
- Intermetallic compound (a phase)
- Gamma prime (L12 Ni3(Al,Ti))
- Precipitate
- Passive film
- Phase diagram
Kinds (15)
- Iron meteorite
- Steel
- Bronze
- Brass
- Superalloy
- High-entropy alloy
- Shape-memory alloy
- Amalgam
- Electrum
- Pewter
- Solder (eutectic alloys)
- Aluminium alloy (age-hardening, e.g. duralumin)
- Substitutional alloy
- Interstitial alloy
- Arsenical bronze
wired (1)
Notes published science
- A bronze statue keeps a clock in its lead. Lead added for casting sits in the bronze as tiny droplets; fresh from the furnace they hold about 3% tin, and over hundreds of years the tin seeps out, so ancient bronzes have almost none. Conservators measure it with X-rays to spot modern fakes, though a fast-cooled small piece can fool the test (src:artioli-2024).
- Alloying started by accident in the ore: the oldest tin-copper object (about 4650 BCE, Plocnik, Serbia) was probably smelted from a natural tin-copper mineral, and the first arsenical bronzes from naturally arsenic-rich copper; people only later chose tin on purpose, because the mix was easier to control and its fumes were not toxic (src:wp:bronze).
- Your door handle can be a disinfectant: pure copper kills 99.9% of bacteria in an hour (60% copper takes two), and hospital rooms fitted with copper-alloy parts had 58% fewer infections; the same trick of ions leaving a metal is what gives 10-15% of people a rash from nickel jewelry (src:villapun-2016, src:michels-2015, src:genchi-2020).
- Of 658,008 ways to mix five of 40 elements in equal parts, a computer map says only about 5% settle into one simple crystal; the team made two of its predictions and they worked (src:chen-2023-hea).
Layers
The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.
the alloy as metallurgists describe it (reader's view: the melt and its setting, atoms and bonding, phases, microstructure, properties, performance in service)
- L1: The melt and its setting: base metal, additions, fluxes, heat and quench in making; air, water, salts, loads, cells and light in service
- L2: Atoms and bonding: a base metal and other elements held by metallic bonding, mixed substitutionally or interstitially
- L3: Phases: solid solutions, intermetallic compounds and mixtures, mapped by phase diagrams (solubility limits, solidus and liquidus, eutectics)
- L4: Microstructure: grains, dendrites, precipitates and defects left by cooling, ageing and working
- L5: Properties: strength, hardness, ductility, melting range, conductivity, corrosion resistance, colour, creep resistance, shape memory
- L6: Performance in service: coins, tools, statues, bells, solder joints, implants, turbine blades, and their ends
the boardroom (shared floors)
- L4: The microstructure: grains, dendrites, phases, precipitates (coherent or not), defects, set by composition and by thermal and mechanical history
- L5: The properties: strength, hardness, ductility (often traded against strength), melting range, conductivity, corrosion resistance, colour, creep resistance, shape memory
- L6: Performance in service: the coin, tool, statue, bell, solder joint, implant or turbine blade, and how it ends (creep, bronze disease, dezincification, stress shielding, scrap)
way in: Elements added to the melt (base metal, solutes, master alloys, scrap)
- L1: The charge: base metal, alloying elements, master alloys of fixed content, scrap; fluxes take impurities out
- L2: Atoms dissolve by size: similar sizes swap places (within about 15%), much smaller ones fit between
- L3: A place in the lattice, or not: a solid solution while below saturation; an intermetallic when electronegativities differ much; a second phase beyond the limit
way in: Heat and cooling (melt, quench, ageing, service temperature)
- L1: Heat of the melt or furnace; the quench that draws it off; room-temperature ageing; the hot gas around a turbine blade
- L2: Atoms diffuse, exponentially faster when hotter; in many-element alloys diffusion is sluggish
- L3: Solubility and state shift with temperature: the solubility limit, the melting range between solidus and liquidus, the eutectic point
way in: Light (colour and plasmon resonance)
- L1: Light falling on the alloy or on alloy nanoparticles
- L2: The conduction electrons resonate (local surface plasmon resonance)
- L3: Alloy content and chemical ordering tune the resonance; silver gathers at the surface
- L4: Particle shape and size tune it further
way in: Living things at the surface (bacteria, macrophages, skin and its sweat)
- L1: Bacteria landing on touch surfaces; cells around implants; skin in prolonged contact with jewelry
- L2: Cells make active oxygen and change the chemistry at the surface; sweat corrodes nickel
- L3: The passive film altered by the cells
way in: Mechanical load (hammering, rolling, service and creep loads)
- L1: Hammer, rolls and extrusion in making; weight, spin and heat-driven creep loads in service
- L2: Dislocations move and carry the plastic flow
- L3: Solute stress fields, ordered precipitates and grain boundaries meet the dislocations and slow or stop them
way in: Water, oxygen and salts at the surface (air, sea, sweat, body fluids)
- L1: Oxygen, water, chloride, salt water and body fluids
- L2: Surface oxidation: an oxide layer grows (copper oxide on bronze; chromium or aluminium oxide)
- L3: The passive film holds, or breaks and re-forms within 1-2 ms; chloride stops it re-forming
- L4: Attack picks out one constituent or phase: zinc leached from brass leaves porous copper; copper chlorides start bronze disease
way out: Edges and points (tools, weapons)
- L1: Material cut, pierced or struck; no sparks from bronze
- L5: A hard head and a softer tang in one arrow
- L6: Tools, weapons and armour harder than stone or copper
way out: Heat held (turbine hot sections run hotter)
- L1: A hotter engine: more efficient, less carbon emitted
- L5: Creep resistance up to 85% of incipient melting
- L6: Single-crystal blades and disks in the hot section
way out: Ions given off to what touches it (copper to bacteria, nickel to skin)
- L1: Copper ions at a bacterial envelope; nickel ions absorbed through skin
- L5: Corrosion at the surface frees ions; more copper, faster killing
- L6: Touch surfaces, jewelry, coins and implants
way out: Lead and other metals into the air from making it (mining, smelting)
- L1: Lead settles into peat and lake sediment and stays
- L6: Metal production at scale for alloys
way out: Loads carried (turbine disks, airframes, implants in bone)
- L1: The load held; the bone beside a stiff implant shielded from it
- L5: Strength and stiffness: implant alloys far stiffer than cortical bone
- L6: The part in service: a disk, a frame, a hip stem
way out: Motion from a shape-memory element (valves, joints)
- L1: The hot and cold flow ratio changed
- L5: Shape recovered on heating
- L6: An actuator or tube joint
way out: Scrap back into the melt
- L1: Remelted: almost 90% of brass; old bronzes from whatever scrap was at hand
- L6: Retired brass and bronze collected; magnets sort iron out
way out: Sound (bells, strings)
- L1: The ring carried into the air
- L6: Bells, cymbals, piano and guitar strings
Sources (29) published science
Wikipedia: Superalloy (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Prasad K, Bazaka O, Chua M et al. 2017. Metallic Biomaterials: Current Challenges and Opportunities. Materials 10:884. doi:10.3390/ma10080884 (PMC5578250, CC BY) (behind its links)
Eliaz N. 2019. Corrosion of Metallic Biomaterials: A Review. Materials 12:407. doi:10.3390/ma12030407 (PMC6384782, CC BY) (behind its links)
Wikipedia: Bronze (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Villapun VM, Dover LG, Cross A, Gonzalez S. 2016. Antibacterial Metallic Touch Surfaces. Materials 9:736. doi:10.3390/ma9090736 (PMC5457048, CC BY) (behind its links)
Wikipedia: Precipitation hardening (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Wikipedia: Brass (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Wikipedia: Solid solution strengthening (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Kumar S, Ahmed SF, Pal A et al. (2026) Environmental burden of diesel engines: a life-cycle assessment and the imperative for cleaner alternatives. Global Challenges (behind its links)
Wikipedia: Eutectic system (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)
Hand tool (Wikipedia, via Wikimedia Enterprise snapshot) (behind its links)
Wikipedia: Phase diagram (via Wikimedia Enterprise, snapshot 2026-11-01) (behind its links)