← all systems · see it in The System
Computer-aided design
The use of computers to aid in the creation, modification, analysis or optimisation of a design: a designer's gestures, commands and constraints, together with imported, scanned and stored data, are held as a geometric model (curves, surfaces and solids, built from features under constraints) from which drawings, analyses and manufacturing instructions are produced. Born with Sketchpad, aircraft lofting and numerical-control programming around 1957-1963; today 2D drafting, 3D solid and parametric modelling, linked to simulation (CAE) and manufacturing (CAM).
Properties published scienceour proposal
Sourced fields, and our own readings.
| born at | 1957-1963 (APT and PRONTO, Boeing 727 lofting 1959-62, Citroen 1959, Sketchpad 1963); contested (C-2701) |
| born precision | range |
| boundary | Inside: the CAD system as its builders describe it: the interface that takes the designer's gestures and commands (light pen, mouse, keyboard, buttons), the constraint solver, the geometric modelling kernel (boundary representation, constructive solid geometry, NURBS curves and surfaces, regularized Boolean operations, tolerances), the feature and parameter history (design intent), assembly models, the stored model and its library, the display generator, and the translators and exporters that read and write other formats. Outside: the designer (a person, the partner across the interface), the computer and processor it runs on, other CAD systems and suppliers' files, analysis tools (CAE: FEA, CFD), manufacturing machines (CAM, CNC, 3D printers), the physical products and the scanned objects. On the line: the interaction loop between designer and display (Coons and Mann's 'design team', contested as tool or team, C-2702), and the neutral exchange formats (IGES, STEP) that both sides are built to. |
| nested level | Runs on a computer as an application program (booked runsOn sys:software L6 and sys:computer L7); built from a kernel, a constraint solver, a feature modeller and an interface; a part of engineering practice (engineering's records floor L3 names CAD models and drawings; mechanical engineering's design floor L5 uses it). What runs on CAD's output: manufacturing (CAM), analysis (CAE), product data management. |
| scale | technological |
Measures (22) published science
| characteristic clock: pen tracking rate (Sketchpad) | about 100 per second, 1 ms per display Hz |
| display rate (TX-2 scope) | about 100,000 spots per second; 20 microseconds per spot spots/s |
| maximum pen speed tracked | 20 inches/s |
| Sketchpad constraint types | 5 expanded to 17 in about two days types |
| Sketchpad drawing experience by 1963 | about 100 hours |
| TX-2 memory | 64k 36-bit words |
| cost of imperfect interoperability, US automotive supply chain | at least 1 billion (component approach 1,050,444 thousand; aggregate 1,015,602 thousand) US$/year (1999) |
| share of interoperability cost | mitigation 86%, delay 9%, avoidance 5% |
| CAD data transfers at one automaker | at least 7,000 per month; up to 16,000 at peaks transfers/month |
| development delay from imperfect interoperability | about 2 months (OEMs); about 4 months of a 36-month development (suppliers) |
| efficiency of a CAD hand-off between firms (derived) | not computable as usable-out/sent-in from the sources; the cost (at least $1 billion a year, 86% of it spent repairing or re-entering files) stands in for the toll n/a |
| default CAD tolerance below which gaps barely affect simulation | 0.001 model units |
| IGES last official version | 5.3 (1996) version |
| features in a complicated injection-moulded part model | up to about a thousand features |
| SketchGraphs corpus | 15 million sketches; lines 68.47% of primitives; coincident 42.17% of constraints sketches; % of primitives and constraints |
| ABC corpus and meshing cost | over 1 million models collected in 4 months; about 2 CPU years to mesh them models; CPU-years |
| DeepCAD dataset | 178,238 models with construction sequences |
| Fusion 360 Gallery reconstruction set | 8,625 human design sequences in a sketch-and-extrude language |
| survival of CAD/CAM ceramic dental restorations (RCTs pooled) | 96% (95% CI 94-98%), mean follow-up 12-64 months; 25 studies (13 RCTs, 12 cohorts) |
| de Casteljau's work kept confidential | February 1959 to 1971 (about 12 years) |
| vehicle development lead time (context for interoperability delay) | Chrysler 54 months (1987) to about 29 (1996); GM 36 (1995) to about 24 |
| prototype representation study size | 88 participants (30 physical, 30 virtual, 28 mixed reality) |
Open contentions (3) open contention
Where sources or readings disagree. Both stay on the map.
- C-2700 Does computer-aided design help or hinder creative design?
booked: The map keeps the competing readings; none is ruled.
the other reading: Coons and Mann 1960: the creative end is 'not assailable' and was left aside; some experts: design needs 'right-brain creativity' while CAD tools 'use the left brain' (as reported by src:sekerci-2024-eeg-design-tools); a cited study: no significant difference in creativity between manual tools and CAD; learning tools: generation of novel design alternatives (src:heidari-2024-gdl-cad) - C-2701 Which was the first computer-aided design system?
booked: The map keeps the competing readings; none is ruled.
the other reading: Sketchpad as the ancestor of modern CAD (src:wp:sketchpad); Boeing's 727 as 'probably the first successful industrial application' (src:sanders-2012-boeing); Hanratty's PRONTO, 'the first commercial numerical-control (NC) programming system' (src:sanders-2012-boeing) - C-2702 Is CAD a tool, or a design partner?
booked: The map keeps the competing readings; none is ruled.
the other reading: a man-machine system in which designer and computer are one 'design team' (src:coons-mann-1960; Sutherland's 'man-machine graphical communication system')
Partners and parts published science
Built from / builds (10)
- Constructive solid geometry
- NURBS and Bezier curves and surfaces
- Feature-based parametric modelling
- Assembly modelling
- Translators and neutral formats (IGES, STEP)
- Constraint solver
- Input devices (light pen, later mouse and keyboard)
- Geometric modelling kernel (Parasolid, ACIS, Open CASCADE, ShapeManager, C3D)
- Boundary representation (B-rep) with trimmed NURBS
- Hand drafting and CAD for the drawing work
Sits inside / holds (3)
- Engineering (design)
- Mechanical engineering (the field)
- Product lifecycle management (digital product development)
Trades with (valence) (11)
- Architecture via sys:sensory-environment · Computer-aided design gain
- Human (Homo sapiens) via sys:electromagnetic-field · Computer-aided design gain
- Engineering (design) via sys:sensory-environment · Computer-aided design gain
- Software via sys:electromagnetic-field · Computer-aided design gain
- Shapes (geometry): the practice and the structure via sys:sensory-environment · Computer-aided design gain
- Computer via sys:electromagnetic-field · Computer-aided design gain
- Central processing unit via sys:electromagnetic-field · Computer-aided design gain
- Firm (the economic unit) via sys:market · Computer-aided design mixed
- Mechanical engineering (the field) via sys:sensory-environment · Computer-aided design gain
- Artificial intelligence via sys:written-record · Computer-aided design gain
- Machine via sys:written-record · Computer-aided design gain
expressed by (22)
- Generation/Synthesis
- Recombination/Composition
- Scaffolding/Enablement (Meta-Tooling)
- Templating / Standardization
- Quality Improvement/Refinement
- Interoperability/Transduction (Bridging)
- Encapsulation & Modularity (Abstraction)
- Amplification/Scale-Up (Manufacture & Distribution)
- Symbiosis/Co-Creation (Collaborative Specialization)
- Evolvability/Plasticity Engineering (Design for Future Variation)
- Internal Coordination/Regulation
- Sensing/Scanning
- Search/Foraging
- Mapping/Modeling
- Trail-Marking / Externalized Memory (Stigmergy)
- Offline Simulation & Replay-Guided Planning
- Social Learning / Public Information Use
- Self-Monitoring
- Validation of Identity/Intention
- Resilience & Repair
- Redundancy & Diversity
- Quality Control & Error Correction
floor filled by (20)
- Engineering (design)
- Human (Homo sapiens)
- Software
- Shapes (geometry): the practice and the structure
- Computer
- Central processing unit
- Firm (the economic unit)
- NURBS and Bezier curves and surfaces
- Feature-based parametric modelling
- Assembly modelling
- Translators and neutral formats (IGES, STEP)
- Computer-aided manufacturing (CAM)
- Product data management (PDM)
- Additive manufacturing (3D printing)
- Drafting and computer-aided design
- Computer-aided engineering (FEA, CFD, CAM, PLM)
- Constraint solver
- Input devices (light pen, later mouse and keyboard)
- Geometric modelling kernel (Parasolid, ACIS, Open CASCADE, ShapeManager, C3D)
- 3D scanner
Kinds (10)
- Feature-based parametric modelling
- 2D CAD (drafting)
- 3D wireframe
- 3D 'dumb' solids
- Direct (explicit) modelling
- Freeform surface modelling
- Electronic design automation (EDA)
- Architectural CAD and building information modelling
- Dental CAD/CAM
- Computer-aided geometric design (CAGD)
Notes published science
- The curves under nearly every car body and font were invented twice: Paul de Casteljau worked them out at Citroen in 1959, but Citroen kept his 12-page report secret until 1971, so Pierre Bezier, who found the same curves by a completely different route at Renault, published first and got the name (src:beccari-2025-de-casteljau).
- Ivan Sutherland's 1963 Sketchpad solved the drawing's constraints the way a physical system settles: each step had to remove 'energy'; when his first version added energy instead, the drawing went unstable (src:sutherland-1963-sketchpad).
- In 1999 bad CAD file translations cost the US car industry at least $1 billion a year, most of it people repairing or retyping files that arrived unusable, and delayed new models by about two months (src:brunnermeier-martin-1999-nist).
Layers
The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.
computer-aided design as engineers describe it: a designer's gestures and outside data held as a constrained geometric model, up to a design released to analysis and manufacture (reader's view)
- L1: The world CAD takes in: the designer's hand and pen or mouse movements, typed commands, design conditions (loads, materials, cost, standards), other systems' model files, scanned objects, and the stored library of earlier designs
- L2: Input devices and readers: light pen and push buttons (Sketchpad), mouse, keyboard and command line, scanners, and the translators that read IGES and STEP files
- L3: Geometric primitives and sketches: lines, arcs, splines and Bezier/NURBS curves, 2D sketches with their constraints (coincidence, distance, parallel)
- L4: The geometric model and its kernel: solids as B-rep (trimmed NURBS) and CSG, regularized Booleans, the constraint solver, topology in a linked structure, all within a user-defined tolerance
- L5: Features, parameters and design intent: the history tree of sketches, extrusions and cuts, assemblies of parts, masters and instances
- L6: Evaluation and documentation: drawings with dimensions and tolerances, bills of materials, mass properties and interference checks, analysis (FEA, CFD, topology optimisation), rendering
- L7: Release: the design handed to manufacture (CAM toolpaths and G-code, 3D-printing files, drawings), to suppliers and records (exchange files, PDM), to patents
the boardroom (shared floors)
- L4: The geometric model and kernel: B-rep and CSG solids, the constraint solver (relaxation in Sketchpad), topology held in a linked structure, operations within a user-defined tolerance
- L5: Features, parameters and assemblies: the history of sketches, extrusions and cuts that carries design intent; masters and instances
- L6: Evaluation and documentation: drawings with dimensions and tolerances, mass properties and interference checks, FEA and CFD, topology optimisation
- L7: Release: the design handed to manufacture, suppliers, records and patents
way in: Commands: buttons, menus and typed commands
- L1: Fingers on push buttons, toggle switches and keys
- L2: Buttons and keyboard read by the program (Sketchpad's push buttons; AutoCAD's command line)
- L3: The command chosen: draw line, circle, copy, erase, move, apply constraint
way in: Design conditions: constraints and dimensions the designer imposes
- L1: The limits of materials, cost and function the design must meet
- L2: Applied to the drawing by pointing and pressing a button (make parallel, equal length); dimensions typed
- L3: A constraint graph: primitives as nodes, designer-imposed relations as edges; fully constrained when no degrees of freedom remain
way in: Imported models: other systems' and suppliers' files
- L1: A model file from another system or supplier (one automaker: at least 7,000 CAD transfers a month)
- L2: Translators built to neutral standards (IGES since 1980, STEP Part 21 text files)
- L3: Entities read (rational B-spline curves and surfaces, trimming loops); topology rebuilt where edges coincide only within tolerance, gaps repaired
way in: Learned suggestions: models trained on other designers' CAD
- L1: Public models: over a million collected from Onshape in 4 months; 15 million sketches
- L2: Extraction through the platform's API and STEP export; datasets
- L3: A trained model proposes sketches, constraints or whole construction sequences
way in: Library: stored designs, masters and standard parts
- L1: Earlier drawings stored (on magnetic tape in 1963)
- L2: Retrieval of a master or standard part into the current drawing
- L3: An instance pointing at its master: change the master and every instance changes
way in: Pointing: the designer's hand through light pen or mouse
- L1: The designer's hand moving the pen over the display; the display's own light spots
- L2: The light pen reports any spot in its view; a tracking cross follows it about 100 times a second
- L3: Pen position turned into coordinates and picks of tagged drawing parts; losing track ends the stroke
way in: Scanned shape: existing objects measured
- L1: An existing object or body part (a tooth, a bone, a part to reverse-engineer)
- L2: Scanners: CT, MRI, optical 3D scanners
- L3: Voxels, point clouds and meshes, converted toward surfaces (e.g. marching cubes)
way out: Additive manufacture: files for 3D printers
- L1: Material laid down into the part
- L3: Surface meshes (STL triangles) or NC code for the printer
- L6: A topology-optimised layout made into a manufacturable design
way out: Analysis input: meshes and topology to solvers
- L1: The analysis program's input
- L3: Mesh generation from the boundary representation (the dominant time cost); or the exact NURBS geometry in isogeometric analysis
- L6: The model handed to analysis
way out: Drawings and documents
- L1: Paper or files read by makers, reviewers and patent examiners
- L3: Drawing files and prints; bills of materials generated automatically
- L6: Views, dimensions, tolerances, materials and processes by convention
way out: Exported models to suppliers and other systems
- L1: The file arriving in another firm's system, sometimes unusable
- L3: Written as IGES or STEP (IGES may lose the topology)
- L7: The model sent on
way out: Manufacture: toolpaths and NC code
- L1: Metal, ceramic or resin cut to shape: aircraft parts, car bodies, dental crowns
- L2: Tape or file to the machine controller (at Boeing: cards, magnetic tape, punched tape, analog tape)
- L4: CAM converts the model to G-code; post-processors per machine
- L7: The released model handed to CAM
way out: The picture shown back to the designer
- L1: Light reaching the designer's eyes; random twinkling avoided flicker
- L2: The display draws the spots (about 100,000 a second on the TX-2); today rotation in 3D from any angle
- L4: The model's display file: spots tagged with the part that made them