← all systems · see it in The System
Protein secondary structure (alpha helices, beta sheets, turns)
'Protein secondary structure is the local spatial conformation of the polypeptide backbone excluding the side chains.' It 'is formally defined by the pattern of hydrogen bonds between the amino hydrogen and carboxyl oxygen atoms in the peptide backbone.'
Properties published scienceour proposal
Sourced fields, and our own readings.
| born at | with proteins, by LUCA around 4.2 bya (2024 study) |
| born precision | LUCA confidence interval 4.33-4.09 bya |
| boundary | Inside: the backbone of a stretch of chain (amide N-H, C=O, alpha carbons) in a regular hydrogen-bond and dihedral pattern, side chains excluded by definition. Outside: the side chains, the rest of the chain, water, the membrane, and the tertiary fold that packs the elements. 'The random coil is not a true secondary structure' (it marks the absence). |
| nested level | Built from peptide groups of one chain (or neighbouring strands); embedded in the tertiary fold, domains and supersecondary motifs of a protein. |
| scale | molecular |
Measures (23) published science
| 3-10 helix: residues per turn / rise per residue / radius / pitch | 3.0 / 2.0 A / 1.9 A / 6.0 A residues, angstrom |
| pi helix: residues per turn / rise per residue / radius / pitch | 4.4 / 1.1 A / 2.8 A / 4.8 A residues, angstrom |
| alpha helix: residues per turn / rise per residue / radius / pitch | 3.6 / 1.5 A / 2.3 A / 5.4 A residues, angstrom |
| alpha helix length in proteins | four to over forty residues; typical about ten (about three turns) |
| alpha helix backbone dihedrals (phi, psi) | around (-60, -45); psi(i) + phi(i+1) roughly -105 (3-10 about -75, pi about -130) degrees |
| beta strand length | 3 to 10 amino acids |
| alpha helix diameter with side chains | about 12 angstrom |
| beta strand dihedrals: preferred / antiparallel / parallel | (-135, 135) / (-140, 135) / (-120, 115) degrees |
| C-alpha i to i+2 distance in a pleated strand | about 6 (7.6 if fully extended); about 5 sideways between strands angstrom |
| turn definition: C-alpha separation | less than 7 A, end residues 1 to 5 peptide bonds apart angstrom |
| beta hairpin loop | two to five residues |
| DSSP hydrogen-bond threshold and partial charges | E below -0.5 kcal/mol; q1 about 0.42e (C, O), q2 about 0.20e (H, N) kcal/mol, e |
| far-UV CD signatures | helix double minimum at 208 and 222 nm; beta sheet single minimum 217 nm; random coil 204 nm (range 170-250 nm) |
| collective vibration of secondary structure (characteristic clock) | ~1 THz (period ~1 ps; beta-barrel GFP) |
| DSSP classes | 8 (G, H, I, T, E, B, S, C) classes |
| secondary-structure prediction accuracy | ~60% claimed for early methods (actually lower); nearly ~80% with multiple sequence alignment; upper limit ~90% percent |
| proline bend in a helix axis | about 30 degrees |
| helical penalty per residue relative to alanine | Ala 0.00; Leu 0.21; Arg 0.21; Met 0.24; Lys 0.26; Gly 1.00; Pro 3.16 kcal/mol |
| coiled-coil heptad repeat | 7 residues |
| alpha-helix content of myoglobin and hemoglobin folds | about 70% fraction |
| helix side-chain and carbonyl spacing | about 100 degrees per residue around the axis |
| parallel beta strands in a motif | rarely fewer than five strands |
| conserved helix-favouring positions in homologues | 95% of homologous proteins spanning nearly a billion years (illustration) fraction |
Open contentions (3) open contention
Where sources or readings disagree. Both stay on the map.
- C-235 Do the turns in a protein chain help drive folding, or just go along with it?
booked: The map follows the evidence that turns help bring parts together during folding, and keeps the view that they are passive alongside.
the other reading: turns are passive (poor conservation in most turns; many non-native X-Pro isomers have 'little or no effect') - C-236 How much does the electrical tilt of a protein helix matter?
booked: The map records that the helix has an overall dipole and keeps the debate about how large its effect is.
the other reading: its effects are 'a matter of some controversy': some read it as interacting electrostatically with N-terminal negative groups; others say the free N-H groups' hydrogen bonding (local microdipoles) is the realistic account - C-237 Which protein sheets are more stable: parallel or antiparallel?
booked: The map follows the view that antiparallel sheets are most stable, and keeps evidence for parallel sheets alongside.
the other reading: parallel sheets may be more stable (small aggregating sequences mostly form parallel fibrils); bioinformatic stability readings are confounded by folding kinetics
Cross-scale patterns seen here (9) our proposal
Shapes that recur when the same kind of problem is solved at different scales, and how each shows in Protein secondary structure (alpha helices, beta sheets, turns). Each links to every other system that shows it.
- barrier-gates-complexity (structural)
Shielding from water lets the helix exist: 'short polypeptides do not exhibit much α-helical structure in solution', their bonds 'readily attacked by the ambient water molecules'; 'in more hydrophobic environments such as the plasma membrane ... oligopeptides readily adopt stable α-helical structure - same role, different builds (structural)
One job, pairing up every backbone hydrogen-bond donor and acceptor, done two ways: 'Both the α-helix and the β-sheet represent a way of saturating all the hydrogen bond donors and acceptors in the peptide backbone' (within one chain i to i+4, or between strands). - same shape, opposite sign (structural)
A turn becomes its inverse 'by changing the sign on its dihedral angles' (type I and I-prime, classical and inverse gamma turns): the same mechanism with its sign reversed. - nested ladder (partial)
Elements, then supersecondary motifs, then domains: each level built from the one below (the protein's ladder seen from its second rung). - templating (partial)
One module recurring: the heptad repeat of coiled coils in keratin, myosin and kinesin stalks and dimerising proteins; a four-helix bundle 'very common'; nucleic acids 'also possess characteristic secondary structures'. - the whole sets the local reference (partial)
The local residue does not decide: preferences 'are not strong enough' to predict; an alignment of homologues 'spanning nearly a billion years of evolution' shows a glycine site is helical; helices fray without tertiary support. - causal ceiling (surface)
Prediction tops out at ~90% 'due to the idiosyncrasies of the standard method (DSSP)' it is benchmarked against. - lightning (surface)
Under tension a helix holds, then 'alpha-helical turns break mediated by the rupture of groups of H-bonds' (phase II): stored strain released in groups, after which the helix is not the same. - who opens the door (surface)
A width match, not an installed port: the helix diameter is 'about the same as the width of the major groove in B-form DNA', so helical motifs read DNA. Nobody installed the groove for the helix; the receiver's own physics (self-built) opens the door.
Valence: what it trades, and with whom (10) published science
Each exchange with a neighbour, read from both sides: who gains, who pays, and what carries it.
- Hydrogen bond via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) gain
- Protein domain (and the tertiary fold it builds) via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) gain
- Electromagnetic field via sys:electromagnetic-field · Protein secondary structure (alpha helices, beta sheets, turns) even
- Amino acid via sys:electromagnetic-field · Protein secondary structure (alpha helices, beta sheets, turns) mixed
- DNA and genes via sys:electromagnetic-field · Protein secondary structure (alpha helices, beta sheets, turns) gain
- Protein via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) gain
- Cell membrane via sys:electrochemical-gradient · Protein secondary structure (alpha helices, beta sheets, turns) gain
- Competition for a solute's hydrogen-bond sites (possible only) via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) loss
- Helical symmetry group (screw-axis isometry group) via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) even
- Hydrophobic effect via sys:hydrogen-bond-network · Protein secondary structure (alpha helices, beta sheets, turns) gain
Partners and parts published science
Built from / builds (7)
- Protein
- Competition for a solute's hydrogen-bond sites (possible only)
- Protein domain (and the tertiary fold it builds)
- Protein folding (a chain reaching its working shape)
- Hydrogen-bond network (water)
- Peptide bond (backbone)
- Beta strands
Sits inside / holds (4)
floor filled by (20)
- Protein
- Hydrogen bond
- Protein domain (and the tertiary fold it builds)
- Protein folding (a chain reaching its working shape)
- Water molecule
- Electromagnetic field
- Hydrogen-bond network (water)
- Amino acid
- Cell membrane
- Mechanical contact (touch, grooming, pressure on skin and whiskers)
- Hydrophobic effect
- Peptide bond (backbone)
- Beta strands
- Alpha helix
- Beta sheet
- Turn
- Omega loop
- Supersecondary structure
- Coiled coil
- Beta barrel
represents (1)
Kinds (9)
wired (3)
Notes published science
- Handedness climbs the scales: because amino acids are chiral, every beta strand twists right-handed, the loops joining parallel strands are 'almost always' right-handed, and the alpha helix is right-handed; left-handed helix turns up only in short stretches rich in glycine, the one amino acid with no handedness.
- Pauling found the alpha helix in bed with a cold in 1948, by drawing a chain on a strip of paper and folding it until the hydrogen bonds fit; his first paper then drew it left-handed, the mirror image of the real one.
- Insect antifreeze proteins use a beta helix with a regular row of threonines on one face that mimics the structure of ice.
Layers
The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.
backbone hydrogen bonds (secondary structure)
- L1: Peptide groups along the backbone: amide N-H donors and C=O acceptors, polar, 'neutralised by hydrogen bonding with each other when in the hydrophobic environment'
- L2: The bond pattern: i+4 to i (alpha), i+3 (3-10), i+5 (pi), between strands (beta, parallel or antiparallel), within turns; DSSP counts a bond below -0.5 kcal/mol; patterns may be strongly distorted
- L3: Local geometry: regular backbone dihedrals on the Ramachandran plot (helix about (-60, -45), strand about (-135, 135)); right-handed helix, tightly packed, side chains outward toward the N-terminus; strands pleated and right-twisted by the residues' chirality; inverse turns by sign change
- L4: Elements: alpha helices (typically about ten residues), beta strands in sheets, turns and loops; 3-10 and pi helices rare; random coil is the absence; residue preferences shape but do not decide
- L5: Assembly: supersecondary motifs (hairpin, beta-alpha-beta, Greek key, beta meander, coiled coils, compound turns); elements form as intermediates before the tertiary fold and pack into hydrophobic cores
electromagnetic field (dipoles, spectra, vibrations)
- L1: Far-UV (170-250 nm) and infrared light, and the electric fields of nearby charges
- L2: Dipoles: carbonyl microdipoles aligned along the helix axis sum to a macrodipole; helix N-termini often meet negatively charged groups (effects controversial)
- L3: Signatures: CD double minimum at 208 and 222 nm for helix, 217 nm for sheet, 204 nm for coil; infrared amide oscillations shifted by hydrogen bonding; NMR chemical shifts
- L4: Collective motion: a ~1 THz spectral feature of secondary-structure motion (GFP); low-frequency accordion-like motion of helices and sheets (Raman); beta structures generically more rigid
mechanical load (stretching helices and sheets)
- L1: Axial tensile load, the loading condition in helix-rich filaments and tissues (keratin, myosin stalks)
- L2: Helix under tension: stiff-soft-stiff; phase I homogeneous stretch, phase II turns break as groups of hydrogen bonds rupture, phase III covalent stretching; stretched wool helices uncoil into the extended beta form (Astbury)
- L3: Sheets resist stretching because their strands are already extended
solvent and membrane (amphipathic faces)
- L1: Water around the chain: helix backbone hydrogen bonds are readily attacked by water; short peptides in solution form little helix because the entropic cost is not repaid
- L2: Faces: a helix often has a hydrophobic face toward the core and a polar face toward solvent; a sheet's alternate sides can be hydrophobic and polar, a boundary between watery and greasy environments
- L3: Away from water: in membranes, TFE or the gas phase oligopeptides readily adopt stable helices; membrane-spanning helices satisfy all backbone hydrogen bonds internally (single, paired, or seven in a ring); amphipathic peptides form pores