EVOPEDIA

← all systems · see it in The System

Hydrophobic effect

The hydrophobic effect is the observed tendency of nonpolar substances to aggregate in an aqueous solution and to be excluded by water; in terms of thermodynamics, it is the free energy change of water surrounding a solute.

Properties published scienceour proposal

Sourced fields, and our own readings.

born atwith the first liquid water holding nonpolar solutes (rung 5); no date in the sources read
born precisionnot given
boundaryInside: the water molecules of the solvation shell around a nonpolar surface, their tangentially reoriented bonds and restricted motion, and the free-energy change that is the effect itself. Outside: bulk water (the reference), the nonpolar solutes and amphiphiles it sorts, heat and salt that tune it. Crossed by water molecules moving between shell and bulk, and by solutes moving together or apart.
nested levelBuilt on liquid water's hydrogen-bond network (rung 5); sits inside aqueous solution and drives assemblies one rung up: membranes, protein cores, DNA tertiary structure.
scalemolecular

Measures (18) published science

water motion restriction around larger nonpolar moleculesa factor of two to four
water mobility restriction in the solvation shell of small nonpolar particlessome 10% restriction
water mobility restriction around dissolved xenon (room temperature)30% restriction
water reorientational correlation time, bulk to solvation shell (25 C)2 to 4-8 ps
entropy-to-enthalpy crossover solute size (ambient conditions)~1 nm
hydrophobic contact-angle threshold90 degrees
Defect Interaction Thresholdapproximately -6 (around 30% of a typical hydrogen bond) kJ/mol
superhydrophobic contact angle> 150 degrees
average solvation free energy change on foldinglowers by about 1 kcal/mol per residue
first major hydrophobicity scale (Nozaki and Tanford)9 amino acids
hydrophobicity scales listed by Expasy ProtScale22 scales
structures in the differential accessible-surface scale survey5526 PDB structures
CylR2 heat denaturation midpoint77.5 C
CylR2 cold: dimer interface destabilised-3 C
buried residue contribution to stability (Pace, as cited)as much as -3.5 kcal/mol
CylR2 cold: dimers remaining at -11 Cless than 2% fraction
protein hydration layer distinct from bulk waterto 1 nm
clathrate cage collapse pressureroughly 1-2 GPa

Open contentions (2) open contention

Where sources or readings disagree. Both stay on the map.

Partners and parts published science

Built from / builds (5)

Sits inside / holds (2)

Trades with (valence) (17)

expressed by (3)

floor filled by (24)

Kinds (2)

wired (1)

Notes published science

Layers

The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.

hydrophobic burial in macromolecules (folding and binding in water)

  1. L1: Hydrophobic side chains along a chain in water: valine, leucine, isoleucine, phenylalanine, tryptophan and methionine.
  2. L2: Burial: 'Structures of globular proteins have a hydrophobic core in which hydrophobic side chains are buried from water, which stabilizes the folded state'; charged and polar side chains sit on the solvent-exposed surface.
  3. L3: Driving force: 'Minimizing the number of hydrophobic side chains exposed to water is the principal driving force behind the folding process', with hydrogen bonds also stabilising; folding lowers solvation free energy 'by an average of 1 Kcal/residue'. Contested: comparable to hydrogen bonding (Pace 1996), or backbone hydrogen bonds dominate (Rose 2006).
  4. L4: Other macromolecules and binding: 'The energetics of DNA tertiary-structure assembly were determined to be driven by the hydrophobic effect', alongside base pairing and stacking; the effect is also behind 'protein-small molecule associations'.

hydrophobic effect (own: water's hydrogen-bond network around a nonpolar solute)

  1. L1: The dynamic network of liquid water: each molecule can donate two hydrogen bonds and accept two more, so water 'can form an extended three-dimensional network' (hydrogen fluoride and ammonia mainly form linear chains).
  2. L2: Disruption: 'A hydrocarbon chain or a similar nonpolar region of a large molecule is incapable of forming hydrogen bonds with water'; introducing such a surface 'causes disruption of the hydrogen bonding network'.
  3. L3: The cage: bonds 'reoriented tangentially to such surface', making a structured water 'cage' (clathrate-like basket) of restricted mobility: about 10% for small nonpolar particles, 30% for dissolved xenon, a factor of two to four for larger molecules (reorientational correlation time 2 to 4-8 ps at 25 C).
  4. L4: The cost, booked in the water: 'significant losses in translational and rotational entropy of water molecules'; thermodynamically 'the free energy change of water surrounding a solute' (positive: hydrophobic; negative: hydrophilic). At room temperature entropy-driven, with a favourable enthalpic component.
  5. L5: Release by aggregation: 'By aggregating together, nonpolar molecules reduce the surface area exposed to water and minimize their disruptive effect'; when two particles come close 'the clathrate-like baskets surrounding them merge', releasing water into the bulk. Result: segregation, oil and water separate.
  6. L6: Size regimes: small solutes are 'clathrated' at an entropic cost; for larger solutes bond disruption 'becomes inevitable, leading to a high enthalpic cost'; the switch is 'at around ~1 nm', from scaling with volume to scaling with exposed area. A molecular threshold: hydrophobic if a surface cannot pay back a missing bond better than the Defect Interaction Threshold, about -6 kJ/mol.

hydrophobic self-assembly (aqueous solution: amphiphiles, micelles, bilayers)

  1. L1: Amphiphiles in water: 'molecules that have both hydrophobic and hydrophilic domains' (detergents, phospholipids).
  2. L2: A threshold: micelles 'form only when the concentration of surfactant is greater than the critical micelle concentration (CMC)' and above the Krafft temperature; above the CMC 'the loss of entropy due to assembly of the surfactant molecules is less than the gain in entropy by setting free the water molecules'.
  3. L3: Assemblies: detergents solubilize hydrophobic molecules 'by forming micelles and bilayers'; phospholipids 'self-assemble into a two-layered sheet with the hydrophobic tails pointing toward the center'; 'The assembly process and maintenance are driven by aggregation of hydrophobic molecules'.
  4. L4: Compartment: amphiphilic phospholipid membranes 'prevent the internal aqueous environment of a cell from mixing with external water'; the effect also drives 'insertion of membrane proteins into the nonpolar lipid environment'.

temperature and the hydrophobic effect (thermal energy)

  1. L1: Heat in the solution, which sets how mobile water molecules are.
  2. L2: The split: partition coefficients 'can be transformed to free energy of transfer which includes enthalpic and entropic components, dG = dH - TdS', measured by calorimetry; at room temperature 'entropy-driven'.
  3. L3: Warmer: 'when water molecules become more mobile, this energy gain decreases along with the entropic component'.
  4. L4: Cold denaturation: 'The hydrophobic effect depends on the temperature, which leads to "cold denaturation" of proteins'; 'Both high and low temperatures can lead to unfolding'; heat unfolds two-state, cold non-cooperatively (CylR2: dimer interface weakens at -3 C, under 2% dimers at -11 C; heat midpoint 77.5 C).

water at a nonpolar surface (wetting and contact angle)

  1. L1: A water drop on a surface: Young (1805) 'defined the contact angle' from the interfacial tensions of solid, liquid and gas.
  2. L2: Hydrophobic surface: 'Water on hydrophobic surfaces will exhibit a high contact angle'; the molecular Defect Interaction Threshold 'coincides with the classical 90 degree contact angle threshold'.
  3. L3: Roughness amplifies: 'Wenzel's equation shows that microstructuring a surface amplifies the natural tendency of the surface' (hydrophobic more hydrophobic, hydrophilic more hydrophilic); in the Cassie-Baxter state the drop rests on the asperity tops and is more mobile.
  4. L4: Superhydrophobic: 'The contact angles of a water droplet exceeds 150 degrees'; the lotus effect is 'primarily a physical property related to interfacial tension, rather than a chemical property'.

Who fills each layer

Sources (16) published science

Hydrophobic effect (Wikipedia, rev 1369045280, 2026-08-12)
Micelle (Wikipedia, rev 1369618086, 2026-08-16) (behind its links)
Entropic force (Wikipedia, via Wikimedia Enterprise) (behind its links)
Folding funnel (encyclopedia, Wikimedia Enterprise) (behind its links)
Protein folding (encyclopedia, Wikimedia Enterprise) (behind its links)
Hydrophobe (Wikipedia, rev 1373422556, via Wikimedia Enterprise Snapshot) (behind its links)
Chandler D (2005) Interfaces and the driving force of hydrophobic assembly. Nature 437:640-647. doi:10.1038/nature04162 (abstract via Europe PMC) (behind its links)
Hydrophobicity scales (Wikipedia, rev 1375585566, via Wikimedia Enterprise Snapshot) (behind its links)
Jaremko M et al. (2013) Cold denaturation of a protein dimer monitored at atomic resolution. Nat Chem Biol 9:264-270. doi:10.1038/nchembio.1181 (PMC5521822) (behind its links)
Rose GD, Fleming PJ, Banavar JR, Maritan A (2006) A backbone-based theory of protein folding. PNAS 103:16623-16633. doi:10.1073/pnas.0606843103 (PMC1636505) (behind its links)
Solvation shell (Wikipedia, rev 1346177499, 2026-03-30, via Wikimedia Enterprise cache) (behind its links)
Clathrate hydrate (Wikipedia, rev 1376683338, via Wikimedia Enterprise Snapshot) (behind its links)
Cell membrane (Wikipedia, 2026-10-17) (behind its links)
Lipid bilayer (Wikipedia, rev 1378374263, 2026-10-04) (behind its links)
Protein domain (encyclopedia, Wikimedia Enterprise) (behind its links)
GroEL (encyclopedia, Wikimedia Enterprise) (behind its links)