← all systems · see it in The System
Tokamak
A tokamak is a machine which uses a powerful magnetic field generated by external magnets to confine plasma in the shape of an axially-symmetric torus: toroidal and poloidal coils and a central solenoid, with a current driven in the plasma itself, twist the field lines into helices so the hot fuel stays off the walls long enough to fuse. Walked as the device, its physics and limits, its control, and the people and institutions that build and run it.
Properties published scienceour proposal
Sourced fields, and our own readings.
| born at | 1958 (T-1 at the Kurchatov Institute) |
| born precision | year (one source says late 1957) |
| boundary | Inside: the vacuum vessel and the plasma it holds; the magnet system (toroidal field coils, central solenoid, poloidal field coils, superconducting or copper); the plasma current and the helical field it makes; heating and current drive (ohmic, neutral beams, radio-frequency waves); fuelling (gas, pellets, tritium injection); the first wall, limiters and divertor; diagnostics and the real-time plasma control system; cooling, cryogenics and pumping. Outside: the grid that powers it, the fusion reaction itself (sys:nuclear-fusion, a sibling walk), the plasma's own physics (sys:plasma), the neutrons once they leave the shield, the tritium plant and supply chain, and the laboratories, states and collaborations that design, fund and run tokamaks. |
| nested level | A kind of magnetic confinement fusion device (with the stellarator, pinches and mirrors); built from magnets, a vessel, a plasma, heating, fuelling, wall and control systems; embedded in national and international fusion programmes (Kurchatov, Culham, PPPL, JET, ITER) and in the wider effort to make fusion power. |
| scale | technological |
Measures (50) published science
| Discharge (pulse) duration | seconds or minutes in modern tokamaks; 1056 s on EAST (world record pulse with improved confinement, 2023) |
| Vertical instability growth rate held (TCV) | more than 1.4 kHz, held by a controller acting at 10 kHz |
| Tearing prediction horizon (DIII-D) | 25 ms ahead (reward computed on the prediction); one instability forecast 300 ms before the disruption |
| Control cycle (TCV magnetic controller) | 10 kHz (one command every 0.1 ms) |
| First tokamak in operation (T-1) | 1958 (end of 1958; one source says late 1957) year |
| Kruskal-Shafranov limit | q > 1 (earlier pinches ran near q = 1/3; tokamaks at q much greater than 1) dimensionless safety factor |
| Disruption timescale | confinement lost in milliseconds ms |
| Plasma current to keep fusion alphas in the fuel | about 3 MA |
| Major disruption rate | on the order of a few percent of shots fraction of shots |
| Runaway electron current in a major disruption (ITER-class) | up to 12 MA deposited on a small area (plasma current about 15 MA) |
| ITER design disruption budget | 2600 events over its lifetime |
| Greenwald density limit | n_GW [10^20 m^-3] = I_p [MA] / (pi a^2); exceeded by up to 10 times in some cases (encyclopedia) |
| Ohmic heating ceiling | about 2-3 x 10^7 K |
| Operating temperature for a reactor | greater than 10 keV (over 10^8 K) |
| Ideal ignition floor (D-T) | 4.3 keV: below it bremsstrahlung exceeds alpha heating |
| Fermi's self-sustaining temperature (1944) | about 50,000,000 K |
| T-3 electron temperature and confinement (1968) | 1000 eV; confinement at least 50 times the Bohm limit |
| PLT ion temperature (1978) | about 6 x 10^7 K (8,000 eV), eight times T-3's record |
| Sakharov MTR design power (1951) | 900 MW D-D reactor: major radius 12 m, minor radius 2 m, 5 T, density 3 x 10^20 m^-3, ion temperature 100 keV |
| ECRH absorbed fraction, T-3 1973 | at least 30 kW absorbed of 40 kW gyrotron power at 35 GHz (at least 0.75) |
| ECRH heating efficiency, T-10 | 70-80% |
| Radiated fraction in q > 1 regimes (early tokamaks) | did not exceed 30% of the power delivered |
| T-15 heating and field | neutral beams 9 MW, ECR and ICR 6 MW each; 3.6 T on axis from Nb3Sn superconducting coils (design 3.5 T) MW, T |
| TCV size and actuators | major radius 0.88 m, vessel 1.50 m high and 0.512 m wide; 19 actuated coils |
| TCV real-time magnetic sensors | 34 flux loops, 38 field probes, 19 coil-current measurements sensors |
| EAST heating and current drive power | 32 MW: NBI 8 MW, lower hybrid 10 MW, ECRH 2 MW at 140 GHz, ICRH 12 MW |
| DIII-D field, current and heating | up to 2.2 T, 2.0 MA, 23 MW T, MA, MW |
| JET peak D-T fusion power (DTE1, 1997) | 16.1 MW (ELM-free hot-ion H-mode); 22 MJ fusion energy in a steady pulse |
| JET gain Q (1997) | 0.67: 16 MW of fusion power for 24 MW of heating ratio |
| Scientific gain Qsci reached (TFTR, JET) | 0.27 (TFTR), 0.64 (JET) ratio |
| JET fusion energy per pulse (DTE2, 2021) | 59 MJ (world record at the time); 69 MJ later (record standing as of 2025) |
| JET neutrons produced in DTE2 | 8.5 x 10^20 neutrons |
| JET tritium used (T and DTE2 campaigns) | 1 kg (240 g into the plasma by gas injection, 763 g to the neutral beams); about 100 g in DTE1 |
| JET wall surface temperature limits | beryllium limiters below 900 C; tungsten-coated CFC divertor tiles 1200 C |
| JET operating life | 1983 to December 2023; decommissioning expected to last until 2040 years |
| Tritium half-life | 12.32 years |
| Tritium consumption per GW-year of fusion power | 55.8 kg per 1000 MW of fusion power per year |
| Tritium injected relative to tritium burned | 20 to 200 times ratio |
| Tritium processing time needed for self-sufficiency | 1-4 h, with burn fraction times fuelling efficiency above 2% |
| Outside tritium needed at TBR 0.9 (STEP-scale) | 8-11 kg per full power year for a 1500-2000 MW device kg/yr |
| STEP steady heat loads | first wall below 1.3 MW/m2; divertor strike points 5-10 MW/m2 |
| Tritium start-up inventory (3 GW plant) | about 11 kg at 2% and 4 h processing; under 5 kg at 5% and 1 h |
| ITER divertor heat load (D-T phase) | as high as 20 MW m^-2 MW/m2 |
| SPARC design (field, size, gain) | B0 = 12.2 T, R0 = 1.85 m, a = 0.57 m; Q > 2 goal, Q about 11 and 140 MW projected at 8.7 MA T, m |
| SPARC volume relative to ITER | roughly 2% |
| D-T reaction products | alpha particle 3.5 MeV, neutron 14.1 MeV |
| ITER goals | Q = 10 momentarily, Q = 5 at steady state; about 500 MW of fusion power from about 50 MW of heating ratio |
| ITER first plasma (expected) | 2033-2034; deuterium-tritium operation planned from 2039 year |
| ITER cost | projected 18-22 billion euros for construction and operations (higher estimates disputed by ITER); initial budget close to 6 billion euros EUR |
| Tokamak programme scale (early 1970s US) | a tokamak cost about $500,000; the US annual fusion budget was about $25 million USD |
Open contentions (6) open contention
Where sources or readings disagree. Both stay on the map.
- C-1346 What sets the density limit in a tokamak?
booked: The map keeps both: the long-used empirical limit, and the newer explanation through turbulence at the plasma's edge.
the other reading: Greenwald 1988's empirical scaling as the operating bound; 'exceeded up to factors of 10' and 'still needs to be understood' (encyclopedia) - C-1352 Which was the first tokamak?
booked: The map uses T-1, in 1958, and keeps the encyclopedia's caution that it is only 'sometimes considered' the first, with earlier ring-shaped machines alongside.
the other reading: the encyclopedia: T-1 is only 'sometimes considered the first tokamak'; one source says late 1957; earlier toroidal machines (TMP, 1955) were pinches with the same layout - C-1355 Why does a tokamak's plasma suddenly hold its heat better (H-mode)?
booked: The map records the jump as observed and keeps the leading explanation, a sheared flow calming turbulence at the edge, as one reading.
the other reading: magnetic shear stabilising edge turbulence (encyclopedia: 'thought to be caused by'); other proposed mechanisms not read - C-1358 Will ITER's exhaust system cope with its plasma?
booked: The map keeps both: the design for 20 megawatts per square metre, and simulations suggesting it may not cope with sudden bursts and disruptions.
the other reading: ITER's own design basis (not read here) - C-1361 Is the tokamak the best route to fusion power?
booked: The map records it as the leading design for now, and keeps its shortcomings and the other designs being built alongside.
the other reading: 'not without shortcomings' (Beidler 2021); highest triple products 'may not necessarily become the first widely deployed commercial fusion-energy systems' (Wurzel and Hsu); private companies mostly chose other concepts - C-1381 Can a fusion plant breed all its own tritium fuel?
booked: The map keeps both: today's technology may not meet the need, and one design outlines how it could be done.
the other reading: either
Partners and parts published science
Built from / builds (14)
- Plasma
- Tritium breeding blanket
- Toroidal field coils
- Central solenoid
- Poloidal field coils
- Vacuum vessel and first wall
- Divertor (and limiters)
- Neutral beam injectors
- Plasma control system
- Diagnostics
- Fuelling system
- Radio-frequency heating and current drive
- Tokamak against stellarator, pinch and mirror for the lead in magnetic confinement
- Fusion devices against decay for the world's tritium
Sits inside / holds (4)
Trades with (valence) (22)
- Engineering (design) via sys:written-record · Tokamak gain
- Nuclear fusion via sys:plasma · Tokamak gain
- Electron via sys:electromagnetic-field · Tokamak mixed
- Photon via sys:electromagnetic-radiation · Tokamak mixed
- Electromagnetic field via sys:electromagnetic-field · Tokamak gain
- Neutron via real:neutron · Tokamak mixed
- Alpha particle (helium-4 nucleus) via sys:plasma · Tokamak gain
- Human (Homo sapiens) via sys:written-record · Tokamak gain
- State (polity); the nation state its predominant modern form via sys:written-record · Tokamak gain
- Tritium (hydrogen-3) via sys:gas · Tokamak mixed
- Laser via sys:electromagnetic-radiation · Tokamak gain
- Lithium atom via real:neutron · Tokamak gain
- Entropy via sys:thermal-energy · Tokamak loss
- Plasma via sys:electromagnetic-field · Tokamak gain
- Computer via sys:electromagnetic-field · Tokamak gain
- United States (the country across time) via sys:written-record · Tokamak gain
- Electricity via sys:electricity · Tokamak loss
- Superconductivity via sys:electromagnetic-field · Tokamak gain
- Stellarator via sys:electromagnetic-field · Tokamak gain
- Physics (the field) via sys:written-record · Tokamak gain
- Experiment, measurement and uncertainty (the physics lab as a practice: designing, measuring, estimating error) via sys:written-record · Tokamak gain
- Materials science (the field) via sys:matter · Tokamak gain
expressed by (35)
- Generation/Synthesis
- Recombination/Composition
- Scaffolding/Enablement (Meta-Tooling)
- Templating / Standardization
- Niche Construction (alter environment)
- Quality Improvement/Refinement
- Interoperability/Transduction (Bridging)
- Encapsulation & Modularity (Abstraction)
- Amplification/Scale-Up (Manufacture & Distribution)
- Symbiosis/Co-Creation (Collaborative Specialization)
- Distributed Autonomy/Decentralized Execution (Subsidiarity)
- Internal Coordination/Regulation
- Sensing/Scanning
- Mapping/Modeling
- Navigation/Pathfinding
- Uncertainty Reduction/Learning
- Active Experimentation / Probing (Optimal Experimental Design)
- Multi-Scale Data Fusion / Triangulation
- Surprise / Change-Point Detection
- Hypothesis Portfolio / Multiple Hypothesis Tracking
- Offline Simulation & Replay-Guided Planning
- Social Learning / Public Information Use
- Overcome Barrier
- Speed
- Resource Denial/Attrition
- Quick Harm Avoidance
- Reactive Response
- Proactive Defense
- Physical/Virtual Barrier
- Self-Monitoring
- Delay/Redirection Tactics
- Validation of Effectiveness
- Redundancy & Diversity
- Quality Control & Error Correction
- Scheduled Build-and-Dismantle (On-Demand Structure)
floor filled by (24)
- Nuclear fusion
- Electromagnetic field
- Alpha particle (helium-4 nucleus)
- Human (Homo sapiens)
- Deuterium (hydrogen-2)
- Tritium (hydrogen-3)
- Plasma
- Computer
- Electricity
- Superconductivity
- Toroidal field coils
- Central solenoid
- Poloidal field coils
- Vacuum vessel and first wall
- Divertor (and limiters)
- Neutral beam injectors
- Plasma control system
- Diagnostics
- Fuelling system
- Ohmic heating
- H-mode
- Fusion energy research programmes
- ITER Organization
- Radio-frequency heating and current drive
Kinds (6)
- Magnetic confinement fusion
- Spherical tokamak
- Superconducting tokamak
- Advanced tokamak
- High-field compact tokamak
- Negative-triangularity configuration
wired (1)
Notes published science
- The tokamak was born in a weapons lab and proved by a Cold War house call. Tamm and Sakharov sketched it in 1950 while working on the hydrogen bomb; in 1969 a British team carried a laser into the Kurchatov Institute, measured the Soviet plasma's temperature themselves, and found the Soviets were right. That one measurement set off a 'veritable stampede' of tokamak building worldwide (src:wp:tokamak, src:smirnov-2010).
- An AI now flies the plasma. On the Swiss TCV tokamak a single neural network, trained only in a simulator, took over all 19 shaping coils at 10,000 commands a second, held a plasma whose vertical wobble grows faster than 1,400 times a second, and even kept two separate plasmas 'droplets' alive in one vessel at once (src:degrave-2022-tcv).
- Fusion fuel mostly goes round and round. A burning tokamak has to inject 20 to 200 times more tritium than it actually burns, because the fuel leaks out of the plasma so fast; the rest is pumped out, cleaned in a few hours and fed back in, and a power plant would burn about 56 kg of tritium per gigawatt-year of fusion power, a fuel that decays away with a 12-year half-life (src:abdou-2021-tritium).
Layers
The ways it takes in its world, where they meet, and how it acts back, each from L1 (where it meets the world) up.
the boardroom (shared floors)
- L5: The confined plasma: confinement and transport. Where power, fuel, heating, alphas and impurities meet in one plasma: energy confinement time, L-mode and H-mode (edge transport barrier above a power threshold), internal barriers, bootstrap current, turbulent transport; Bohm scaling beaten by an order of magnitude in the 1960s
- L6: Limits and control: the operating space (q above 1, Greenwald density, pressure and tearing limits, ELMs, disruptions) held by the plasma control and protection system, which reads magnetics, profiles, density, wall heat and the programme's targets and commands coils, heating and fuel in real time
- L7: Output and purpose: fusion power and gain (Q), records, burning plasma, ITER scenarios and power-plant designs; the laboratories, states and collaborations that set the goals and read the results
tokamak (reader's view: power and fuel in, magnets, the plasma and its equilibrium, heating, confinement, limits and control, fusion out and the programme)
- L1: What it draws on and sits in: electric power through the coil power supplies, deuterium and tritium fuel, the evacuated and baked vessel, cryogenics and cooling water
- L2: The magnets and their field: toroidal field coils (D-shaped), the central solenoid and poloidal field coils, copper or superconducting; field lines twisted into helices with safety factor q > 1
- L3: The plasma and its equilibrium: a current induced in the plasma (the transformer's secondary), a vertical field for force balance (Grad-Shafranov), the shape (elongation, triangularity, D-shape, X-point)
- L4: Heating, current drive and fuelling: ohmic heating, neutral beams, electron and ion cyclotron and lower hybrid waves, gas and pellets, and alpha self-heating in D-T
- L5: Confinement and transport: energy confinement time, L-mode and H-mode (edge transport barrier), internal barriers, bootstrap current, turbulence; the triple product
- L6: Limits and control: q, density (Greenwald), pressure and tearing limits, ELMs, sawteeth, disruptions and runaway electrons; the divertor; diagnostics feeding a real-time plasma control and protection system
- L7: Output and purpose: fusion power (alphas in, neutrons out), heat to the cooling system, gain and records; the mission set by laboratories and collaborations (JET, ITER, SPARC, STEP) toward power plants
way in: Alphas: self-heating from D-T fusion (inner)
- L1: D-T reactions in the hot core release 3.5 MeV alpha particles
- L2: The charged alphas are held by the same field as the fuel; they stay in when the plasma current is about 3 MA
- L3: Alphas collide with fuel nuclei and heat them, reducing the external heating needed
- L4: Alpha effects: alpha-driven Alfven eigenmodes; at ignition self-heating carries the burn alone
way in: Density and fluctuations: interferometry, reflectometry, soft x-rays
- L1: Microwave and far-infrared beams crossing the plasma; soft x-ray emission
- L2: Interferometers, reflectometers, soft x-ray detectors
- L3: Line-averaged density and spectra of density perturbations (modes at 156 kHz in a JET D-T pulse)
- L4: Modes identified and located (toroidal Alfvén eigenmodes with n = 3 or 4 driven by alphas)
- L5: Density held by real-time feedback in long pulses (EAST 1056 s: density well controlled)
way in: Fuel in: deuterium and tritium
- L1: Deuterium and tritium gas; frozen D-T pellets (seeded with a little xenon in STEP's design)
- L2: Tritium gas injection modules, gas valves, pellet injectors (centrifuge-propelled); neutral beams also carry fuel
- L3: Ionised in the plasma; beam atoms re-ionise, are trapped and add to the fuel
- L4: Density held by injection and cryopumping; most injected tritium leaves unburnt (injection 20-200 times consumption)
way in: Fusion products: neutrons, gamma rays, lost alphas
- L1: 14 MeV neutrons and gamma rays leaving the plasma, untouched by the magnetic field; escaping fast alphas
- L2: In-vessel-calibrated neutron yield monitors, neutron spectrometers (MPRu, diamond), a 2D neutron/gamma camera, a fast-ion loss detector and Faraday cups
- L3: Absolute fusion power from neutron counting, activation and gamma spectrometry
- L4: Tomographic reconstruction of the alpha-particle source; alpha losses mapped
way in: Heating in: neutral beams and radio-frequency waves
- L1: Microwaves and radio waves from gyrotrons and klystrons outside the torus; fast neutral atoms from beam injectors
- L2: Coupling: waves of the right frequency and polarisation resonate with electrons or ions; neutral beams cross the field and ionise
- L3: Energy given to electrons or ions; current driven without the transformer (lower hybrid, ECCD)
- L4: Collisions spread the energy to the bulk plasma (ECRH heating efficiency 70-80% on T-10)
way in: Impurities from the wall
- L1: Wall, limiter and divertor materials (beryllium, tungsten, carbon, lithium; ceramic and silica in the earliest machines)
- L2: Atoms sputtered by hot ions or outgassed from the container enter the plasma
- L3: Impurities radiate and cool the fuel; heavier atoms are worse
- L4: Core impurity accumulation degrades fusion power (JET pulse #99972)
way in: Kinetic profiles: Thomson scattering, charge-exchange spectroscopy, electron cyclotron emission
- L1: Laser light scattered by the plasma's electrons, charge-exchange spectral lines, electron cyclotron emission
- L2: Thomson scattering system, charge-exchange recombination spectroscopy, ECE radiometer (core Te from ECE on JET)
- L3: Real-time profiles of electron density and temperature, ion temperature and rotation
- L4: Profiles reconstructed and mapped on magnetic flux coordinates with EFIT
- L5: A dynamic model predicts normalised pressure and tearing likelihood 25 ms ahead
way in: Magnetics: flux loops, field probes and coil currents
- L1: The magnetic field and flux round the plasma, made by the coils and the plasma current
- L2: Wire loops that measure magnetic flux, probes that measure the local field, coil-current measurements (34, 38 and 19 on TCV)
- L3: Sampled every control cycle (10 kHz) and handed to the controller
- L4: Equilibrium reconstruction: an inverse problem finding the current distribution that satisfies Grad-Shafranov force balance and best matches the measurements (LIUQE, EFIT)
- L5: State estimates: plasma current, position, shape, X-point; or read directly by a learned policy without a shape observer
way in: Power in: electricity to the coils
- L1: Electric power from the supply
- L2: Thyristor-based power supplies apply voltages to the coils
- L3: Coil currents make the toroidal and poloidal fields; a rising solenoid current induces the plasma current
- L4: The plasma current makes the poloidal field that twists the lines and heats the plasma ohmically
way in: The programme: experiment plans and control targets
- L1: Experimental goals written by physicists: shapes, currents, scenarios (ITER-like shapes, snowflakes, droplets)
- L2: Targets specified at a high level and combined into a reward function
- L3: The policy and its targets compiled into an executable for real-time control at 10 kHz
- L4: Loaded into the TCV control framework; a traditional controller forms the plasma, then hands over at a set time
way in: Wall heat: pyrometers and infrared cameras
- L1: Heat on the limiters, first wall and divertor tiles
- L2: An array of pyrometers and infrared cameras
- L3: Real-time vessel temperature monitoring
- L4: Alarm generation against the surface limits (beryllium 900 C, tungsten-coated tiles 1200 C)
way out: Coil voltages: shaping and holding the plasma
- L1: The plasma's position, current and shape follow (elongation, triangularity, X-points, two 'droplets')
- L2: Power supplies change coil currents; the poloidal field changes
- L6: The controller sends voltage commands to the coils (a single network to all 19 coils on TCV; PID loops conventionally)
way out: Fuel and gas: density control
- L1: Gas puffs and pellets enter the plasma; density held
- L6: Fuel and gas injection, one of the three main plasma control actuators
way out: Heat and ash out: divertor, wall, cooling water
- L1: The wall conducts heat to water cooling; pumps remove gas and helium ash
- L3: The divertor takes them to target plates, away from the main wall; detachment spreads the load
- L5: Heat and particles leave the confined region along open field lines
way out: Heating power: beams and waves turned up or down
- L1: Plasma pressure rises or falls
- L4: Beams and waves deposit energy and drive current
- L6: Total beam power and triangularity chosen by the controller; the plasma control system sets the individual beams and coils
way out: Light out: the visible glow and other radiation
- L1: Visible light dominated by the hydrogen-alpha line (656 nm) reaches cameras and eyes
- L5: The plasma radiates; impurities radiate more
way out: Neutrons out: shield, blanket, tritium breeding
- L1: In reactor designs they meet lithium in a breeding blanket and make tritium and heat; they activate the hall
- L2: Neutrons pass the vessel; shields of water, plastics and boron concrete absorb them
- L5: Each D-T reaction sends a 14.1 MeV neutron out of the plasma
way out: Results out: records, scenarios, trained staff
- L1: Published papers and design bases read by the next machines (SPARC's projections rest on the ITER Physics Basis)
- L7: Results compiled: fusion energy records, isotope physics, scenarios for ITER, staff experience
way out: Transients: ELMs, disruptions, runaway beams onto the wall
- L1: Thermal and electrical loads land on the vessel in milliseconds; runaway beams can burn through it
- L6: Control or limits fail: ELM crash, thermal and current quench, runaway avalanche
Sources (25) published science
ITER (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Spherical tokamak (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Smirnov V.P., Tokamak foundation in USSR/Russia 1950-1990, Nuclear Fusion 50, 014003 (2010), doi:10.1088/0029-5515/50/1/014003 (IOP open PDF) (behind its links)
Creely A.J. et al., Overview of the SPARC tokamak, J. Plasma Phys. 86, 865860502 (2020), doi:10.1017/S0022377820001257 (Cambridge open access, CC BY-NC-ND 4.0) (behind its links)
Maggi C.F. et al., Overview of T and D-T results in JET with ITER-like wall, Nuclear Fusion 64, 112012 (2024), doi:10.1088/1741-4326/ad3e16 (IOP open access, CC BY 4.0) (behind its links)
Joint European Torus (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Cane J. et al., Managing the heat: in-vessel components, Phil. Trans. R. Soc. A 382, 20230408 (2024), doi:10.1098/rsta.2023.0408 (PMC11423682, CC BY 4.0) (behind its links)
Meyer H. (STEP Plasma Team), Plasma burn: mind the gap, Phil. Trans. R. Soc. A 382, 20230406 (2024), doi:10.1098/rsta.2023.0406 (PMC11423683, CC BY 4.0) (behind its links)
Edge-localized mode (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Divertor (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Stellarator (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)
Hassanein A. and Sizyuk V., Potential design problems for ITER fusion device, Scientific Reports 11, 2069 (2021), doi:10.1038/s41598-021-81510-2 (PMC7822851, CC BY 4.0) (behind its links)
High-confinement mode (Wikipedia; Wikimedia Enterprise via tools/wme) (behind its links)